Go Back   RIBnet Forums > RIB talk > Engines & props
Click Here to Login

Reply
 
Thread Tools Search this Thread
 
Old 27 September 2007, 11:31   #1
Member
 
Country: UK - England
Town: Gloucestershire
Boat name: Osprey
Make: Osprey Vipermax
Length: 5m +
Engine: E-tec 300 G2
MMSI: TBC
Join Date: Dec 2006
Posts: 4,020
Diesel Engine Vibration problem

.....Not a boat engine however Im hoping one of you diesel heads might know...

I am having problems with my Passat V6 diesel which has 85000 on the clock and is 3 years old.

The engine has developed an annoying vibration which I am being told may be a missfire due to Pump or Injector issues. The vibration happens pretty much all the time at idle the engine feels slightly lumpy then as you accelerate it becomes a noticeable thrumming vibration. It happens on overrun as well and also when in neutral and stationary so is definately not a gearbox issue.

The car recently had a cambelt change and since then the problem occured then went away for a week and is now back again, so I don't think the timing or cambelt is at fault otherwise it would not have gone away for the week.

The car also had a full service at the time including filter change so I am hopeful that a fuel blockage is the culprit

Any other ideas?

Chris
__________________
Chris is offline   Reply With Quote
Old 27 September 2007, 12:23   #2
Member
 
Country: UK - Wales
Town: Here
Boat name: doggypaddle
Make: Avon 5.4 Searider
Length: 5m +
Engine: yamaha 80
Join Date: Jul 2007
Posts: 1,107
is it down on power at all? if it was a miss fire i would expect you would have noticed a drop in power. Have you checked the engine and exhaust mountings? nothing rubbing the body? V6 engines are inherently unbalanced and will transmit more vibration to the bodywork than a straight 6 or a v8 though i guess VAG use counterrotating balancer shafts to combat this.
i suppose it could be a slight missfire maybe caused by air in the system, any visible damp patches on fuel system where air could get in?
__________________
doggypaddle is offline   Reply With Quote
Old 27 September 2007, 12:26   #3
mdt
Member
 
Country: UK - Scotland
Town: fife
Make: Humber / searider
Length: 5m +
MMSI: ... - - - ...
Join Date: Sep 2005
Posts: 720
hope you have a blocked injector. Have this V6 in my Audi and the pump went no warning at all £1200 for the part + vat

how many miles has it been doing this for ?

have you not got any fault codes poping up when it is plugged in ?
__________________
“The only difference between men and boys, is the price and size of their toys”
mdt is offline   Reply With Quote
Old 27 September 2007, 13:16   #4
Member
 
Country: UK - England
Town: Gloucestershire
Boat name: Osprey
Make: Osprey Vipermax
Length: 5m +
Engine: E-tec 300 G2
MMSI: TBC
Join Date: Dec 2006
Posts: 4,020
It still pulls ok however it may be down on power a little, not to sure. No air leaks can be detected. It has only been doing this since the service so about 500 miles now.

I am hoping its not the pump also MDT as the best price I have had so far is £800 for a recon unit.

I am taking it to a diesel specialist who will test the injectors etc. so hope to have more info tomorrow.

Chris
__________________
Chris is offline   Reply With Quote
Old 27 September 2007, 14:04   #5
Member
 
Country: UK - Scotland
Boat name: Wildheart
Make: Humber/Delta Seasafe
Length: 5m +
Engine: Merc 60 Clamshell
MMSI: 235068449
Join Date: Apr 2007
Posts: 4,671
Common rail?

I assume if itls 3 years old it's a "common rail" (i.e electonic injectors as opposed to the pump doing all the work). If so try unplugging them all, and check the contacts / spray some WD40 (other types of "save the world" oil are available ) in & reconnect. I know dozens of petrol cars with "faulty injectors" when in most cases the plug had worked loose or similar.
__________________
9D280 is offline   Reply With Quote
Old 27 September 2007, 16:24   #6
DJL
Member
 
Country: UK - England
Make: Ribcraft 6.5
Length: 6m +
Engine: Suzuki DF175TG
Join Date: Apr 2002
Posts: 929
The DMF could be failing/failed. Does the engine rattle when you switch off or do you get more vibration as you let in/out the clutch?
__________________
DJL is offline   Reply With Quote
Old 27 September 2007, 17:05   #7
RIBnet admin team
 
Nos4r2's Avatar
 
Country: UK - England
Town: The wilds of Wiltshire
Boat name: Dominator
Make: SR5.4
Length: 7m +
Engine: Yam 85
MMSI: 235055163
Join Date: Jul 2005
Posts: 13,054
RIBase
It's worth chucking a whole bottle of diesel redex injector cleaner into 1/4 tank of fuel. It'll smoke a bit but if there's crud in there it'll clean it out quite well.
__________________
Need spares,consoles,consumables,hire,training or even a new boat?

Please click HERE and HERE and support our Trade Members.

Join up as a Trade member or Supporter HERE
Nos4r2 is offline   Reply With Quote
Old 27 September 2007, 18:34   #8
Member
 
Country: UK - England
Town: Gloucestershire
Boat name: Osprey
Make: Osprey Vipermax
Length: 5m +
Engine: E-tec 300 G2
MMSI: TBC
Join Date: Dec 2006
Posts: 4,020
DJL there is no rattle and letting the clutch in has no impact

NOS I am going to bung in some redex and give that a go.

chris
__________________
Chris is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 04:17.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.