Reply
 
Thread Tools Search this Thread
 
Old 06 February 2008, 08:49   #1
Member
 
Country: UK - England
Town: London
Boat name: Iolar Na Mara
Make: Brig
Length: 6m +
Engine: Mercury Ver 150
Join Date: Jan 2008
Posts: 10
RIB Tent Adaption

As I'm new to the world of RIBs this may be a daft question.. but..!

Has anybody adapted a tent to fit the bow of their RIB? I fancy doing some camping along the coast without the necessary hassle of finding a campsite, leaving the boat, etc.

I'm going to come up with a design but thought I'd see what else may be out there that might help. I've looked around and found little so I guess what better place to try than here!

Rob.
__________________
grimesrfg is offline   Reply With Quote
Old 06 February 2008, 09:12   #2
Member
 
Country: Ireland
Town: Ardmore
Boat name: Wavehopper
Make: Cobra 6.65 HD
Length: 6m +
Engine: Yam 150 hpdi
Join Date: Dec 2006
Posts: 136
There was long discussion about this last year - have a look for it with the 'search' facility
__________________
blimp is offline   Reply With Quote
Old 06 February 2008, 10:23   #3
Member
 
Country: UK - England
Town: Worcester
Make: Northcraft
Length: 6m +
Engine: 115hp Yam 4 stroke
MMSI: 235063097
Join Date: Jun 2007
Posts: 156
Have a look on the RIB Covers page at http://www.covercareltd.co.uk/

Might give you a few ideas.
__________________
Trickdog is offline   Reply With Quote
Old 06 February 2008, 10:31   #4
RIBnet supporter
 
LURCHER's Avatar
 
Country: UK - England
Town: Lymington Hampshire
Boat name: Hot Lemon
Make: Scorpion
Length: 8m +
Engine: Yanmar diesel
MMSI: 235
Join Date: May 2002
Posts: 780
I am trying to find a reasonable priced roof tent which I will adapt to sit on top of my pax seats .www.autohome.it/file_gb/magg_safari.html is the type of thing . Price is a problem and I am not sure how long it would last in a salty enviroment. I have the luxury of lots of room with 6 double jockeys!
__________________
www.hiremarquee.co.uk
LURCHER is offline   Reply With Quote
Old 06 February 2008, 10:41   #5
RIBnet admin team
 
Nos4r2's Avatar
 
Country: UK - England
Town: The wilds of Wiltshire
Boat name: Dominator
Make: SR5.4
Length: 7m +
Engine: Yam 85
MMSI: 235055163
Join Date: Jul 2005
Posts: 13,054
RIBase
Quote:
Originally Posted by LURCHER View Post
I am trying to find a reasonable priced roof tent which I will adapt to sit on top of my pax seats .www.autohome.it/file_gb/magg_safari.html is the type of thing . Price is a problem and I am not sure how long it would last in a salty enviroment. I have the luxury of lots of room with 6 double jockeys!

That doesn't look like something that'd be hard to make yourself given the access to material you've got through your line of work?
__________________
Need spares,consoles,consumables,hire,training or even a new boat?

Please click HERE and HERE and support our Trade Members.

Join up as a Trade member or Supporter HERE
Nos4r2 is offline   Reply With Quote
Old 06 February 2008, 11:18   #6
Member
 
Country: UK - Scotland
Town: Ardfern
Boat name: Moon Raker
Make: Humber Destroyer
Length: 5m +
Engine: Honda BF 90 D
MMSI: 235035994
Join Date: May 2006
Posts: 694
Quote:
Originally Posted by grimesrfg View Post
As I'm new to the world of RIBs this may be a daft question.. but..!

Has anybody adapted a tent to fit the bow of their RIB? I fancy doing some camping along the coast without the necessary hassle of finding a campsite, leaving the boat, etc.

I'm going to come up with a design but thought I'd see what else may be out there that might help. I've looked around and found little so I guess what better place to try than here!

Rob.
Not enough space in the bow of mine to sleep in, so I made a tent out of a heavy duty tarpaulin. Pics show stages in construction and a view brailed up at anchor. It's not pretty, I know. I have to sleep athwartships on the aft bench seat, head on tube as a pillow, so have to cover the whole boat or the floor would get very wet. Hoops are plastic overflow plumbing pipe with a strip of oak inside to give stiffness. Ends are plugged with wood and have a 10mm dia spigot made from an old fibreglass tent pole. These fit into holes drilled in the D section fenders and into stainless tube centreline supports that I made up and had welded locally. Tent is held down with bungee thingys hooked round rubber cleats glued just under the rubbing strake.

It's very much a mark 1 version (you didn't realise?). Windows are the next thing. Hope to get those in this spring. Also need to arrange some bracing for the hoops and add another one in the bow. Top end of force 5 is its maximum without that.

When I get it just right I may get a tent/cover maker to use it as a template for a 'proper' one. On the other hand the tarpaulins are only £30 or so and weigh very little. Maybe I won't bother.

Spent quite a few nights aboard last season with great success. After end is left open for ventilation (I'm in a tent with maybe 80 litres of fuel in the middle of it ). I had concerns about the tank vent but there's enough ventilation, no smell of fuel and I was able to use my small camping gaz stove to brew up and heat the tins. (On hot sultry nights I might have to stuff some paper towel in the vent.... er! This is Argyll, there' are no sultry nights.) maybe a plastic tube led over the side might be better.

Hope that helps.
Attached Thumbnails
Click image for larger version

Name:	Ribtent1.jpg
Views:	437
Size:	109.8 KB
ID:	32708   Click image for larger version

Name:	Ribtent2 1.jpg
Views:	633
Size:	112.5 KB
ID:	32709   Click image for larger version

Name:	Ribtent3.jpg
Views:	1168
Size:	68.1 KB
ID:	32710   Click image for larger version

Name:	Ribtent4.jpg
Views:	511
Size:	89.0 KB
ID:	32711   Click image for larger version

Name:	Snd of Luing Tent.jpg
Views:	3965
Size:	71.8 KB
ID:	32712  

__________________
alystra is offline   Reply With Quote
Old 06 February 2008, 15:25   #7
Member
 
Country: UK - England
Town: London
Boat name: Iolar Na Mara
Make: Brig
Length: 6m +
Engine: Mercury Ver 150
Join Date: Jan 2008
Posts: 10
Quote:
Originally Posted by blimp View Post
There was long discussion about this last year - have a look for it with the 'search' facility
I did a search before sending out the thread but with little joy... found one thread on hard top covers but nothing specific to what I referred to... any chance of helping a fellow Irish man (Cork man but trustworthy) out and giving me some more direction?
__________________
grimesrfg is offline   Reply With Quote
Old 06 February 2008, 15:26   #8
Member
 
Country: UK - England
Town: London
Boat name: Iolar Na Mara
Make: Brig
Length: 6m +
Engine: Mercury Ver 150
Join Date: Jan 2008
Posts: 10
Quote:
Originally Posted by Trickdog View Post
Have a look on the RIB Covers page at http://www.covercareltd.co.uk/

Might give you a few ideas.
Thanks for that.. I'll give them a shout.
__________________
grimesrfg is offline   Reply With Quote
Old 06 February 2008, 16:42   #9
Member
 
Country: UK - Scotland
Town: Ardfern
Boat name: Moon Raker
Make: Humber Destroyer
Length: 5m +
Engine: Honda BF 90 D
MMSI: 235035994
Join Date: May 2006
Posts: 694
Quote:
Originally Posted by LURCHER View Post
I am trying to find a reasonable priced roof tent which I will adapt to sit on top of my pax seats .www.autohome.it/file_gb/magg_safari.html is the type of thing . Price is a problem and I am not sure how long it would last in a salty enviroment. I have the luxury of lots of room with 6 double jockeys!
They look great if you've got the space. Somehow though, I think I live in a different world.
__________________
alystra is offline   Reply With Quote
Old 08 February 2008, 22:33   #10
Member
 
Country: UK - England
Town: Macclesfield
Boat name: Aqua Fresh
Make: Zodiac Medline
Length: 5m +
Engine: 60hp Yamaha
MMSI: 235051988
Join Date: Feb 2006
Posts: 333
re camping on a RIB

Hi I came across the following at SIBS last year, although its not a tent i guess it wouldnt take to much to have it made as one

it might be worth a call

cheers Andy
Attached Thumbnails
Click image for larger version

Name:	20092007.jpg
Views:	549
Size:	95.3 KB
ID:	32748   Click image for larger version

Name:	20092007(001).jpg
Views:	443
Size:	98.4 KB
ID:	32749  
__________________
Stripes, we like stripes just need some stars now !
floater is offline   Reply With Quote
Old 11 February 2008, 12:15   #11
Member
 
Country: UK - England
Town: Poole
Length: no boat
Join Date: Jul 2001
Posts: 673
I got a boat cover manufacturer to build a custom cover. It hooked over the front and drawer strings ran below the tubes to the stern, where they were pulled tight. The cover was tied off on the console grab handle.

Spent many a good night sleep under-cover.

Cheers

Mark
Attached Thumbnails
Click image for larger version

Name:	Under-Cover.jpg
Views:	483
Size:	31.4 KB
ID:	32813  
__________________
MarkWildey is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 06:00.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.