Reply
 
Thread Tools Search this Thread
 
Old 07 December 2004, 12:29   #1
Member
 
Country: UK - England
Town: I.O.W
Boat name: Danger Donut
Make: 6.0 rib
Length: 6m +
Engine: Mariner F60efi
Join Date: Nov 2003
Posts: 185
Introducing the new Shearwater cuddy cabin rib

We've used with his cooperation, Mike Rings 7.5mtr / 8.6mtr offshore hulls which are used by military world wide and designed and built a fresh new deck, console and seating.
The console has a twin birth, The centre cushions come out giving lots of storage fishing rods, skis ect and a place to sit out the weather for a change of clothes etc. There are options of a sea toilet and fridge box it also has wrap round sides and proper windscreen to give better weather protection, it has a foul weather canopy and a jump seat in front.
There is a large raised anchor locker in the bow with sun cushions, also options of Jockey or bolster helm seats.
We have two aft end options the Blue water is as photographed with open transom and higher rear seat for three aimed at rougher weather to avoid the spray. The version soleil has an engine well and lower four person rear seat ( like cobra etc).
The approximate price for a realistic package with 200hp Optimax and some electronics for the 7.5 would be £34000 and the 8.6 with 225 hp Optimax Mercury £37500.
We have the hull photographed here as a demo boat if you would like a run give us a ring.
I've attached pictures for you
If you would like more info please don't hesitate to call.
look forward to hearing from you.
Regards Jim Robinson
Tel 01983 872817
Attached Thumbnails
Click image for larger version

Name:	5.jpg small.jpg
Views:	423
Size:	20.2 KB
ID:	9578   Click image for larger version

Name:	sal 1.jpg
Views:	406
Size:	56.3 KB
ID:	9579   Click image for larger version

Name:	DSCF0042.JPG
Views:	527
Size:	51.4 KB
ID:	9580   Click image for larger version

Name:	DSCF0102.JPG
Views:	456
Size:	36.1 KB
ID:	9584   Click image for larger version

Name:	DSCF0019. small.jpg
Views:	580
Size:	52.5 KB
ID:	9585  

__________________
Jim Robinson is offline   Reply With Quote
Old 10 December 2004, 05:44   #2
Member
 
Country: France
Town: Lussan (30580)
Boat name: Gibbule
Make: RIBTEC 6.55
Length: 6m +
Engine: Yamaha 200 HPDI
Join Date: Sep 2003
Posts: 13
Send a message via MSN to Bibounde78
Nice concept and not too much expensive.
__________________
Best regards
:o)
Philippe,

https://www.pneuboat.com/frames.php?u....php&num_pp=18
Bibounde78 is offline   Reply With Quote
Old 10 December 2004, 22:49   #3
Member
 
Country: UK - England
Town: Bembridge IOW
Make: Cobra 8.5m
Length: 8m +
Engine: Merc DTronic 250hp
Join Date: Apr 2004
Posts: 39
It hasn't taken you long to get to this stage - looks really good! Have a gr8 Christmas.

Regards

Paul
__________________
Paul Knowlson is offline   Reply With Quote
Old 10 December 2004, 23:19   #4
Member
 
Country: UK - Channel Islands
Town: St Martins
Boat name: MATRIX
Make: Jeanneau Leader 805
Length: 8.05
Engine: Volvo KAD 43 Diesel
Join Date: Jan 2003
Posts: 248
Any chance of some shots of the inside please?
__________________
www.soltron.co.uk
DepSol is offline   Reply With Quote
Old 11 December 2004, 08:27   #5
Member
 
Country: UK - England
Town: emsworth
Boat name: the black stuff
Make: BALLISTIC
Length: 8m +
Engine: 2 x 200hp etec's
Join Date: Dec 2003
Posts: 446
looked quite nice at gunwarf the other day , but a lot smaller cabin than other ribs of the same size

you should see the baby at ocen quey although not in the same price bracket it will be a big hit
__________________
RIVA is offline   Reply With Quote
Old 11 December 2004, 10:22   #6
Member
 
Country: UK - England
Town: south coast
Make: ribcraft
Length: no boat
Engine: 150 opti
Join Date: Dec 2004
Posts: 1
I`m going to bembridge today i'll have a look, and try and get some more pics.
Looks very nice, very bespoke, not the usual.
__________________
nelly is offline   Reply With Quote
Old 13 December 2004, 18:23   #7
Member
 
Country: UK - England
Town: cowes
Boat name: Wetter the Better
Make: DT marine
Length: 10m +
Engine: Inboard diesel
Join Date: Dec 2004
Posts: 2
Nice rib, saw it on your pontoon looking very sexy and fast. You've used ring hulls, nice pedigree hull shape. Can't wait to go for a test blast, hopefully before christmas. I'll be intouch.

Dave
__________________
Dave T is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 00:42.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.