For Sale: 2006 Yamaha 25hp 2 stroke outboard

[nauti nic]

2006 Yamaha 25hp 2 stroke outboard tiller but can be set up with remotes low usage and in very good condition for its age it measures 17" from top of the transom bracket to the cavitation plate making it a short shaft £1100 Ono
Pictures on gumtree unable to load any on here sorry

[69cmw]

Engine looks good, but I thought the L on the serial plate stood for long shaft ?

[nauti nic]

Seemingly it's a long short shaft but classed as a short shaft according to a Google search or would you call it a medium shaft all very confusing

[jeffstevens763@g]

https://www.google.co.uk/imgres?imgu...&tbnw=97&w=150

for info

[69cmw]

Originally Posted by nauti nic

Seemingly it's a long short shaft but classed as a short shaft according to a Google search or would you call it a medium shaft all very confusing

Strange, you sure it's the correct serial number on the engine?

[jeffstevens763@g]

Originally Posted by nauti nic

2006 Yamaha 25hp 2 stroke outboard tiller but can be set up with remotes low usage and in very good condition for its age it measures 17" from top of the transom bracket to the cavitation plate making it a short shaft £1100 Ono
Pictures on gumtree unable to load any on here sorry

if you measure from the bottom of the bracket to cav plate it will be 15 inches thickness of bracket is were the 17 inch comes from

[Fred.]

Jeffstevens763@g pic from his link



nauti nic
Link to Gumtree Ad & photo's
https://www.gumtree.com/p/other-wate...rd-/1187597880

[jeffstevens763@g]

looks short to me but dont know about the L not a very good pic of mine but it a short shaft if that helps. nice engine is that though.

cheers

[Yabadabadoo]

Second that, nice looking lump. Wasn't Max..looking for a 25 a while back?

[nauti nic]

Serial number on bracket matches engine number unless it's been converted to a short shaft by previous owner.

[jeffstevens763@g]

Originally Posted by Yabadabadoo

Second that, nice looking lump. Wasn't Max..looking for a 25 a while back?

Max was its on the back burner last I heard

[jeffstevens763@g]

Originally Posted by nauti nic

Serial number on bracket matches engine number unless it's been converted to a short shaft by previous owner.

Suppose that's a possibility but that would make it more attractive to me if I were buying knowing it can be converted two different boat possibilities then small rib & sib trailer & fold up well worth the money been a year ago would have snapped your hand off for it.

[Fenlander]

>>>Max was its on the back burner last I heard

I think Max spent about 10yrs sibbing budget on a VW campervan and disappeared into Europe.

BTW my guess is also a lower unit swap in the past to make it a short shaft. I'd be totally happy to buy on that assumption... nice motor.

[dave3235]

Originally Posted by nauti nic

Serial number on bracket matches engine number unless it's been converted to a short shaft by previous owner.

Hi all

I have a 20hp Merc mariner with a 17 inch leg

[jeffstevens763@g]

Originally Posted by dave3235

Hi all

I have a 20hp Merc mariner with a 17 inch leg

Now I was going to stick my neck out but thought better of it but since Dave 3235 has said 17 inch leg I thought I had seen short shaft and standard shaft over the years now what that means to me is there's an intermeadate size hence 17 inch now is that bracket thickness and measurements taken top rather than bottom of the bracket or is it boat design and outboard manufactures trying to accommodate would like to know if anyone knows. The point I am trying to make is the lifting of engines on blocks or plates etc is it not as standard as we think? 15, 20, 25 etc

[dave3235]

Originally Posted by jeffstevens763@g

Now I was going to stick my neck out but thought better of it but since Dave 3235 has said 17 inch leg I thought I had seen short shaft and standard shaft over the years now what that means to me is there's an intermeadate size hence 17 inch now is that bracket thickness and measurements taken top rather than bottom of the bracket or is it boat design and outboard manufactures trying to accommodate would like to know if anyone knows. The point I am trying to make is the lifting of engines on blocks or plates etc is it not as standard as we think? 15, 20, 25 etc

Hi all

I have been told it's ex MLNI ! But I have had a few ☺

[dave3235]

Originally Posted by dave3235

Hi all

I have been told it's ex MLNI ! But I have had a few ☺

The measurement is 17 inch from bottom of transom mount

[nauti nic]

Outboard now sold to two very happy guys

[jeffstevens763@g]

Originally Posted by nauti nic

Outboard now sold to two very happy guys

Not surprised in the slightest