hi all
my anode come loose and took a chunk out my prop,also lost anode in the canal,not a good day boating . so im looking for a replacement prop my outboard is a 2001 mariner 50hp eptt, i have inspected the prop and found the following along the side : 73136A40P13Mercury, also looking at the front behing the bolt that holds the prop on small A and also number 6 . so if anyone has a prop they want to part with please let me know.
What is the bolt spacing and mounting hole diameter?
(assuming itr is a long thin anode held on by 2 bolts, one on each clamp?)
If they match, make me an offer.
The anode was bought for my old Yam, which then destroyed itself so I stripped the anodes as I had replaced them at the beginning of that season. Probably only seen about 8-10 hrs of salt water. Sold the trim anode last year, before anyone asks!
hi 9d280
soz i should have mentioned, it was only the prop i was after, i have a new anode for the outboard,got from fleabay turned up today 03/04/12, anode was the fin type one,with just one bolt holding it inplace, why on earth there wasnt a spring washer on it i dont know. anyway yes just a prop i need, thanks anyways.
I have a new yamaha SS prop that should fit if your interested let me know
Pete
yes would be intrested, but i know thay can be very pricey,i beleave the one on my outboard is a alloy one which i would be happy with, but if the price is right and it would fit yes im intrested, ive sent you a IM Pete
. so im looking for a replacement prop my outboard is a 2001 mariner 50hp eptt, i have inspected the prop and found the following along the side : 73136A40P13Mercury, also looking at the front behing the bolt that holds the prop on small A and also number 6 . so if anyone has a prop they want to part with please let me know.
