Wanted Evinrude E-TEC prop wanted

nauti nic · 26 June 2018, 11:04

I’ve got a etec 90 and only achieving 4100 rpm at wot it’s got a 13.25 19p prop fitted so I’m looking for a 17p stainless preferably

nauti nic · 05 July 2018, 07:34

Sorry it’s a 17p I’ve got so needing 15 or 16p

Pikey Dave · 05 July 2018, 07:54

You need to be around the 5600 rpm mark, that's a lot of revs to find. Dropping 2" wouldn't normally gain you so many. Is the engine set up correctly? Is the TPS calibrated correctly?

nauti nic · 05 July 2018, 08:10

Not sure it was a evinrude dealer that originally fitted the engine. I’ll make enquiries about getting TPS checked I was all so thinking of lifting it a hole on the transom

Pikey Dave · 05 July 2018, 08:37

Quote:

Originally Posted by nauti nic

Not sure it was a evinrude dealer that originally fitted the engine. I’ll make enquiries about getting TPS checked I was all so thinking of lifting it a hole on the transom

What size/weight of boat is it on?

nauti nic · 05 July 2018, 08:57

It’s a warrior 170 and it’ll weigh about 950kg including the outboard

two stroke mick · 05 July 2018, 15:38

The first place to start is look at the depth of the engine. if the engine is set too deep then you are wasting money by looking at props first.

TSM