Wanted: Extra Jockey Seat for AvonSearider

[PugnaciousPete]

To anyone out there who might have/makes additional Jockey Seat moulds for these type of vessels, I would be grateful for your response. The Dimensions for these Avon SeaRiders aren't particularly standard. I have an Existing double Jockey seat but need to extend it to accommodate my 2 Sons.
Height of the existing seat is only 32cm, and length of the addtl seat needs to be 22"-24" max I would suggest. ( sorry for the metric,imperial mix)
The existing double jock is flanged outwards so the addtl.mould will need to accommodate that ideally. I have the Marine Ply,Foam & Cover Materials ready to use for the padded seat. Any advice or offers would be much appreciated.

[whisper]

I can build this for you, but I'll have to get my trade membership on here sorted first.

I'm building a mould to make exactly what you are looking for

[PugnaciousPete]

Thanks for your prompt reply, I look forward to your price for this.
Hopefully speak again soon.

[PugnaciousPete]

Seeing your Project again on youtube reminds me of chatting with you Gents at the Southampton Boat show back in September. Glad it was such a successful charity venture!

[Dadiks]

Did you find / do this as I'm also looking to do the same. Any advice appreciated. Cheers

[PugnaciousPete]

Hi there, I saw a while ago a 1 man band offering to make these fibreglass moulds for £130 on ebay ( can't find it at the moment ) I'm thinking of a cheaper alternative...one of those heavy duty cooler boxes which I'd directly glue to the floor. It will also have the advantage of being a ready made storage box. Don't know if that helps...

[ShinyShoe]

Heavy duty cooler may be made of HDPE. Certainly some of our work ones are. Glueing is pretty much impossible...

[beamishken]

Type rib jockey seat into ebay there available from £110

[PugnaciousPete]

Thanks for the advice! I went for a heavy-duty IGLOO cooler which fits perfectly and stuck it (temporarily) with heavy duty stick-on velcro. I'm now looking for a stainless steel frame to go around it with 2 half height back rests but I'm getting quotes for £500 to do this which out of my budget. Ill have to keep shopping around...

[PugnaciousPete]

I'm getting in contact again as Ive tried some local SS fabricators and they're all working out too expensive.Ive paste'd a previous reply to bring an update to my progress.
I went for a heavy-duty IGLOO cooler which fits perfectly and stuck it (temporarily) with heavy duty stick-on velcro. I'm now looking for a stainless steel frame to go around it with 2 half height back rests ,one for the end of the original dble jockey seat and the other for the back of the cooler.but I'm getting quotes for £500 to do this which out of my budget.
Would you be able to do this for a more reasonable price??

[whisper]

Stainless steel is expensive

[whisper]

Stainless steel is expensive

[PugnaciousPete]

Thanks for getting back ,
I'll have to earn some extra dough