Wanted: Humber Seat Backrest

[andrewe251003]

Hi

Has anybody got an old backrest that they want to shift that will fit a 27" Humber seat? - photo attached.
I did buy one from eBay in haste but it is too short at 55cm tall. I am looking for one around 90+ cm.

Cheers
[IMG]c:\desktop\Humber set.jpeg[/IMG]

[andrewe251003]

Sent from my iPhone using RIB Net

[willgrf72]

Got any pics of the one you bought and full dimensions?

[andrewe251003]

Picture attached. Its 55cm tall to the top of the hoop. Bottom holes are 26cm between the centres and the upper ones are 21cm. Judging by the photo in your ad, it's maybe a bit small for what you are after.


Sent from my iPhone using RIB Net

[willgrf72]

Maybe a bit short but maybe not !
So the width of the top part of the loop is the same as the top hole centres. So the bottom tubes could be bent back to a parallel position?
Is the tube angled backwards slightly ?
What is the dimensions between the top holes and top of tube?

[willgrf72]

Err 55-21=34!

[andrewe251003]

Yes, no reason why they couldn't be bent parallel. Picture should show the angle that it leans back.
It is 34cm from the top to the top holes. I was originally referring to the width between centres but the holes are actually 21cm from the bottom.


Sent from my iPhone using RIB Net

[willgrf72]

Probably a bit short really. What do u want for it!

[andrewe251003]

Just what I paid for it. Cost me £25 plus the postage.


Sent from my iPhone using RIB Net

[henryfreston]

I'll be interested if OP decides not to buy

[andrewe251003]

Henry, no reply from willgrf72 so let me know if you are still interested.
Cheers


Sent from my iPhone using RIB Net

[willgrf72]

Hi, sorry I thought I had said its too short. Very sorry.

[willgrf72]

I Must be getting senile !

[andrewe251003]

Sorry, you did say it was probably too short but I thought you were still interested as you asked how much I wanted for it.

No harm done.


Sent from my iPhone using RIB Net