Wanted: Outboard Control Box

[selkiediver]

Hi folks, I am looking for a basic outboard control box to go on the right hand side of my Humber RIB console. It is for a manual start F30 Yamaha, no t&t model and push to open. A Yamaha 701 or similar model would do but would prefer the correct configuration. I already have the cables but not the control box ends. Anything suitable would be considered. Give me a shout if you can help.
Many thanks
Selkiediver

[oren eto]

I have a 701, complete and operating smoothly though it is for mounting on the port side.

Not sure if it can be re-configured but let me know if it is of interest to you.

[selkiediver]

Hi Oren,
Many thanks for your reply. I have the offer of a port side 701 from a friend but was hoping that I could pick one up for the opposite side fitting as there are a few holes drilled for at least two previous units. It looks as though the square shaped universal box would have been fitted originally so the same would do me as well as the uflex b87 model. Cheers

[9D280]

you can reconfigure them - the "square hole" for the lever should be replicated on both sides..... Unless I'm thinking of the 703?

Apologies if I've just given a bum steer, but any box I've ever worked on has been swappable