Wanted: Outboard stand wanted.

[Jizm]

To take large OBM of 200hp +

[Bigtalljv]

I build one out of 4x4 and 2x4 for a suzuki 250, it wasn't that hard. Supported it running too. 4x4 uprights, 4x4 cross to mount engine, and 2x4 legs and angled supports. You can see pictures here, http://www.rib.net/forum/f45/zodiac-...tml#post566854

[Jizm]

Cheers. Not sure I'd want it built of wood. Gonna have other motors to store over the year too.

[Bigtalljv]

just a thought. Mine was on there for 9 months. I knew it was temporary so the price was right. The wood is plenty strong. The design was a little weak laterally.

[spartacus]

Originally Posted by Bigtalljv

just a thought. Mine was on there for 9 months. I knew it was temporary so the price was right. The wood is plenty strong. The design was a little weak laterally.

Agree with that, wood is fine if bolted together with threaded rods, penny washers, etc, plus once you've used it you can stick it in the solid fuel stove!

[Jizm]

Thanks but like I said this will be used all the time for different motors over the next year or so.

[Jizm]

Still after one if these capable of taking a big motor.....

[GONE FISHING]

Hi, Jizm.
IF YOU GIVE ME A RING SOME TIME
I MIGHT BE ABL TO HELP YOU.
REGARDS,
GONE FISHING.
07974 716522

[Jizm]

Typical. Thanks but think I've sorted one now.

[Jizm]

Finally....

[AJ.]

That looks like it will serve you we'll in your older years too!

[Jizm]

I reckon so, she's a sturdy beast!

[j.i.wilson]

Outboard Zimmer, brilliant.

Wonder if a proper Zimmer would hold my Honda 50hp?

Sent from my HTC One X using Rib.net