as above, seastar or equivalent hydraulic steering wanted for 225hp. Must be in good condition. Thanks. (I'll have a Baystar for sale shortly as upgrading engine size.)
Hi I have a seastar 5224 comercial helm. Removed from a RNLI training rig, never seen the sea or any salt water. plus it has a nice approx 20" stering wheel & approx 18ft hydraulic hoses. also fitted to the hose is a bypass valve needed for all coded boats. It's th 2.4 cu/in model so better than 1.7 inch one
I have it stored in my loft so if you are interested I will find it (hopefully) & post some photos. also I have a Vetus 225 Hydraulic cylinder for outboards and Z Drives up to 300Hp. Designed to screw into the outboard steering tube fitting.
The Commercial Hydraulic Helm is specifically designed to be used on smaller fishing vessels in the Lobster and Crabbing fisheries. Commercial Helm Pumps are designed with a stainless steel shaft and heavy duty shaft seal and wiper.
Hi I have a seastar 5224 comercial helm. Removed from a RNLI training rig, never seen the sea or any salt water. plus it has a nice approx 20" stering wheel & approx 18ft hydraulic hoses. also fitted to the hose is a bypass valve needed for all coded boats. It's th 2.4 cu/in model so better than 1.7 inch one
I have it stored in my loft so if you are interested I will find it (hopefully) & post some photos. also I have a Vetus 225 Hydraulic cylinder for outboards and Z Drives up to 300Hp. Designed to screw into the outboard steering tube fitting.
The Commercial Hydraulic Helm is specifically designed to be used on smaller fishing vessels in the Lobster and Crabbing fisheries. Commercial Helm Pumps are designed with a stainless steel shaft and heavy duty shaft seal and wiper.
Hi I have a seastar 5224 comercial helm. Removed from a RNLI training rig, never seen the sea or any salt water. plus it has a nice approx 20" stering wheel & approx 18ft hydraulic hoses. also fitted to the hose is a bypass valve needed for all coded boats. It's th 2.4 cu/in model so better than 1.7 inch one
I have it stored in my loft so if you are interested I will find it (hopefully) & post some photos. also I have a Vetus 225 Hydraulic cylinder for outboards and Z Drives up to 300Hp. Designed to screw into the outboard steering tube fitting.
The Commercial Hydraulic Helm is specifically designed to be used on smaller fishing vessels in the Lobster and Crabbing fisheries. Commercial Helm Pumps are designed with a stainless steel shaft and heavy duty shaft seal and wiper.
