Wanted Tiller Extension.

Explore Cowal · 09 August 2016, 21:29

Looking for a tiller extension. It's for a 20hp Honda 4st, don't think that makes a difference?

Ideally telescopic with a range in region of 600mm (24") to 900mm (36"). Postage would be required as I'm out in the sticks.

Thanks.

jeffstevens763@g · 09 August 2016, 21:59

I have one but it starts at about 700 MM from memory it clamps around the twist grip let me know if of any interest.

Cheers

Explore Cowal · 09 August 2016, 23:13

Thanks, I'll have a measure again tomorrow, sounds like it could work. Could you confirm the retracted and extended measurements.
Regards,
Fraser.

jeffstevens763@g · 10 August 2016, 07:25

Fraser.

its 880 -1400 mm fully out bit too long i suspect.

cheers

Explore Cowal · 15 August 2016, 19:26

Quote:

Originally Posted by jeffstevens763@g

Fraser.

its 880 -1400 mm fully out bit too long i suspect.

cheers

To my front seat (the only seat) from end of outboard tiller it's 900mm, so i think it'd be a tad big.

At 1400mm i'd be out the boat

jeffstevens763@g · 15 August 2016, 19:32

Quote:

Originally Posted by Explore Cowal

To my front seat (the only seat) from end of outboard tiller it's 900mm, so i think it'd be a tad big.

At 1400mm i'd be out the boat

No worries I don't like them to be honest it's sat in the shed since I tried it

Explore Cowal · 15 August 2016, 19:40

It's just so I can sit further forward in the chop, between transom and seat to try and keep the bow down.

jeffstevens763@g · 15 August 2016, 19:51

Yep understand but for me moving it at that length didn't make me feel in control personnel thing

kerlstone · 19 August 2016, 16:40

Hi there, iv'e got a tiller extension you can have for £20, posted, the sizes are on the pics, its in perfect nick and comes with a rubber insert to fit most tillers, and i used it on my 380s yam inflatable and it was the perfect length for that boat so should be good for your's.
I no longer have that boat so no need for it, it cost me £30, + postage.

Gerry.

Explore Cowal · 20 August 2016, 13:25

Quote:

Originally Posted by kerlstone

Hi there, iv'e got a tiller extension you can have for £20, posted, the sizes are on the pics, its in perfect nick and comes with a rubber insert to fit most tillers, and i used it on my 380s yam inflatable and it was the perfect length for that boat so should be good for your's.
I no longer have that boat so no need for it, it cost me £30, + postage.

Gerry.

Gerry,

Excellent, it should do the trick. I'll send you a PM.

Thanks.

Explore Cowal · 24 August 2016, 23:10

Deal done. Thanks Gerry and RibNet.

magicmike0007 · 25 August 2016, 23:29

I use the same one on my yam 380s, it works well!

Explore Cowal · 25 August 2016, 23:35

Quote:

Originally Posted by magicmike0007

I use the same one on my yam 380s, it works well!

Hope to test it out at the weekend

nicksharpe · 21 February 2017, 20:57

Fraser, did you get a tiller extension and if so do you like it and if so what make is it?

As you predicted I need one!

Nick

Explore Cowal · 21 February 2017, 21:08

Quote:

Originally Posted by nicksharpe

Fraser, did you get a tiller extension and if so do you like it and if so what make is it?

As you predicted I need one!

Nick

Nick,

I've yet to use it. If your going out soon and wish to try it your more than welcome.

Cheers.

nicksharpe · 21 February 2017, 22:12

That's ace but no idea how I'd get it from you... Seems a shame to waste the postage.

Explore Cowal · 21 February 2017, 22:27

Where are you? Scoot across in the SIB,ha.

I'll probably be across the water at some point.