New 12m RIB

Adam Younger · 18 March 2009, 15:46

A recent design of ours for a 12m RIB is progressing well with Watermark Marine. Conceived as a RIB capable of fast offshore cruising - we have combined a quick hull with excellent sea keeping abilities. A double chine hull form, giving good beams togther with performance, deep V sections with lots of bow recovery etc.

A number of lay-outs and engine / drive options have been considered - covering uses from a full-on cabin RIB through to open working RIBs.

Attached are a couple of images of the hull plug being constructed.

Please contact me for any further details.

Adam

Pete7 · 18 March 2009, 19:26

Adam hi,

Always interesting seeing a new boat being developed, more photos as you progress please.

Pete

Adam Younger · 23 March 2009, 14:49

Will do - in the meantime I will sort out a few images of different lay-outs.

Adam Younger · 27 March 2009, 09:55

A 3D view of the cabin version

Andre · 30 March 2009, 08:36

Nice project Adam

who is making your tube and what is the diameter. Will it be a tapered tube for the open rib as well.

Adam Younger · 31 March 2009, 11:01

Thanks Andre - actually all being built in China! Tubes as well. I will have to check on the tube dias as it was some time ago when I actually designed her. Certainly was some taper - but not too drastic.

Also just finished a 12m stepped hull RIB design as a fast patrol boat - which is 'meant' to be going into production soon. That has a tube diametre of 600mm tapering down to 320mm. Although other versions may need different tube geometry.