RavenRibs with 2 x 350 SCI

[Actionboat.dk]

Originally Posted by Tony

Hi I am getting up to 62 knots at 5850 rpm. I think the Verado 300 max revs are 6200?
I will see if i can get a rev 4 locally to borrow.(probably not though)
Many thanks for your help.

Max rpm on the 300 is 6400.

We are doing 72kn on a stephull with Rev4 25" twin 300 6390rpm

[codprawn]

Originally Posted by Actionboat.dk

yes the 350 has no knock sensor on and it need to bee ajusted for the EU 95 octan

The mercuryracing has the passport for the inboard racing engine, where they ajust the engine to the fuel.

Can't you use super unleaded? In Britain we have 99 Octane.

[Petrov]

In the water, we achieved 68,5 knots with the Bravo 1, 26 pitch, will do some testing with 3 balde so we can brake 70kn, boat is 11,3m and 3,2m wide and 3,6 tons.

[Petrov]

Some more.

[codprawn]

Well done Petrov - any more videos???

[Petrov]

Originally Posted by codprawn

Well done Petrov - any more videos???

Thanks, not yet but i am shure it will come

[Palmgren]

Looks good Janis! I am a bit jealous that you got more speed from your boat than our quad 300 But, the tubes are much smaller on your boat and the 350 verados are probaly more stable.

post more pictures and videos when possible.

philip

www.norcap-marine.fi

www.ribcenter.fi

[Petrov]

Originally Posted by Palmgren

Looks good Janis! I am a bit jealous that you got more speed from your boat than our quad 300 But, the tubes are much smaller on your boat and the 350 verados are probaly more stable.

post more pictures and videos when possible.

philip

www.norcap-marine.fi

www.ribcenter.fi

Less horsepower/kg and more windresistance in the quad.

[Bigmuz7]

How do you link 3 engines with 2 throttles Petrov ? Have you just 'paired' 2 of them onto 1 throttle ?

[Petrov]

Originally Posted by Bigmuz7

How do you link 3 engines with 2 throttles Petrov ? Have you just 'paired' 2 of them onto 1 throttle ?

Starboard and middle engine is on one throttle and when you coming up to some revs (dont know exact wich revs) the gear of the middle engine automaticly goes in, this is because it should be easier in harbours to only use the side engines.