Sea-rider Refurb - Page 3

ribraff · 07 December 2003, 12:02

Crystic topcoat is basically a sprayable gel-coat. Nice to see you've secured an engine at last Jono!!! Is it the one off e-bay???

Jono Garton · 07 December 2003, 18:26

Ribraff

no a local guy, I'll call you in the morning! everything ok for tommorow/Monday? 12 - 1 at portland bill

ribraff · 07 December 2003, 19:27

Yip, game on for tommorrow, i've got to drop a boat off in plymouth first thing and then i'm on my way. Give me a shout in the morning 07968772471

matiboy · 22 December 2003, 17:38

Can this stuff be sprayed by Mr Jo Average ? as I was thinking of just antifouling hull but this would be a good finish.

ribraff · 23 December 2003, 09:28

Crystic can be sprayed on quite easily, if the finish is not too good you have the added attraction of being able to wet and dry sand and then buff it.

Pete7 · 23 December 2003, 22:35

Ed, this is quite interesting, you sprayed it over orange if I remember correctly, does any colour show through and how many coats did you use ?

Regards

Pete

ribraff · 25 December 2003, 16:04

Hi Pete

I used an undercoat on this job, it's called primecoat and is used for undercoat and plugbuilding, i spayed on the primecoat, a good three or four coats and then wet and dryed to 240 grit which is a pretty good key for the topcoat.