|
|
12 May 2016, 11:35
|
#301
|
Member
Country: UK - Wales
Town: west mids /tywyn
Boat name: HAWK
Make: RIBCRAFT/ Suzuki 250
Length: 7m +
Engine: Tohatsu 3.8/15hpsuzi
MMSI: 235086594
Join Date: Apr 2008
Posts: 4,270
|
Quote:
Originally Posted by SteveHall
I hope I don't run out, I will be carrying 195L - But if I do can I have first dibs on a tow...
|
You going round twice then ...!!
__________________
When you get to the end of your rope..tie a knot and hang on..!!
Aberdovey Ribs
B.I.O.C.Member
B.S. LEADER
|
|
|
12 May 2016, 11:38
|
#302
|
Member
Country: UK - England
Town: Lancs
Boat name: Beretta
Make: Ballistic
Length: 6m +
Engine: 175hp e-tec
MMSI: 235035778
Join Date: Apr 2004
Posts: 1,736
|
I dont know - I have been known to use quite a bit of fuel.
My morse seems to have a fault, it on seems to work in idle speed and WOT...
|
|
|
12 May 2016, 13:25
|
#303
|
Member
Country: UK - England
Town: South Yorks
Boat name: Black Pig
Make: Ribcraft
Length: 5m +
Engine: DF140a
MMSI: 235111389
Join Date: Feb 2008
Posts: 12,171
|
Late comers to the party, but we're hoping to make this one. Looking forward to it.
__________________
Rule#2: Never argue with an idiot. He'll drag you down to his level & then beat you with experience.
Rule#3: Tha' can't educate pork.
Rule#4: Don't feed the troll
|
|
|
12 May 2016, 14:59
|
#304
|
Member
Country: UK - Wales
Town: N Wales Chester
Boat name: Mr Smith
Make: Humber
Length: 6m +
Join Date: Feb 2009
Posts: 5,238
|
[QUOTE=SteveHall;715569]I hope I don't run out, I will be carrying 195L - But if I do can I have first dibs on a tow...[/
Should be fine with that, similar to us. 140L tanks plus 2 25s.
__________________
|
|
|
12 May 2016, 15:00
|
#305
|
Member
Country: UK - Wales
Town: N Wales Chester
Boat name: Mr Smith
Make: Humber
Length: 6m +
Join Date: Feb 2009
Posts: 5,238
|
Quote:
Originally Posted by Pikey Dave
Late comers to the party, but we're hoping to make this one. Looking forward to it.
|
Sun's bringing out the fair weather boaters!! ;-)
(Pot kettle and black spring to mind)
__________________
|
|
|
12 May 2016, 15:04
|
#306
|
Member
Country: UK - Wales
Town: west mids /tywyn
Boat name: HAWK
Make: RIBCRAFT/ Suzuki 250
Length: 7m +
Engine: Tohatsu 3.8/15hpsuzi
MMSI: 235086594
Join Date: Apr 2008
Posts: 4,270
|
Quote:
Originally Posted by HUMBER P4VWL
Sun's bringing out the fair weather boaters!! ;-)
(Pot kettle and black spring to mind)
|
Sailing close to the wind again I see
__________________
When you get to the end of your rope..tie a knot and hang on..!!
Aberdovey Ribs
B.I.O.C.Member
B.S. LEADER
|
|
|
12 May 2016, 15:11
|
#307
|
Member
Country: UK - Wales
Town: N Wales Chester
Boat name: Mr Smith
Make: Humber
Length: 6m +
Join Date: Feb 2009
Posts: 5,238
|
Round Anglesey for Macmillan 14/15 May 2016
Been a while since I saw your midland mug TT! ;-)
See you out on the water, not sure where yet though!! Weather like this I may go round if I can get up and over to Ynys Mon and launched early enough.
Looking forward to seeing the new beast, sad to see Domino go!
__________________
|
|
|
12 May 2016, 15:22
|
#308
|
Member
Country: UK - England
Town: South Yorks
Boat name: Black Pig
Make: Ribcraft
Length: 5m +
Engine: DF140a
MMSI: 235111389
Join Date: Feb 2008
Posts: 12,171
|
Quote:
Originally Posted by HUMBER P4VWL
Sun's bringing out the fair weather boaters!! ;-)
(Pot kettle and black spring to mind)
|
Aye the last time we were down, we crossed to Dublin in a westerly 5-6, there was a regatta going on in Dun Loaghaire, they had a couple of capsizes & a dis-masting the day we crossed. It'll make a change😄
Sh1t happens
__________________
Rule#2: Never argue with an idiot. He'll drag you down to his level & then beat you with experience.
Rule#3: Tha' can't educate pork.
Rule#4: Don't feed the troll
|
|
|
12 May 2016, 15:47
|
#309
|
Member
Country: UK - Wales
Town: west mids /tywyn
Boat name: HAWK
Make: RIBCRAFT/ Suzuki 250
Length: 7m +
Engine: Tohatsu 3.8/15hpsuzi
MMSI: 235086594
Join Date: Apr 2008
Posts: 4,270
|
Quote:
Originally Posted by HUMBER P4VWL
Sun's bringing out the fair weather boaters!! ;-)
(Pot kettle and black spring to mind)
|
Looks boring weather I just might stay at home
__________________
When you get to the end of your rope..tie a knot and hang on..!!
Aberdovey Ribs
B.I.O.C.Member
B.S. LEADER
|
|
|
12 May 2016, 15:49
|
#310
|
Member
Country: UK - Wales
Town: west mids /tywyn
Boat name: HAWK
Make: RIBCRAFT/ Suzuki 250
Length: 7m +
Engine: Tohatsu 3.8/15hpsuzi
MMSI: 235086594
Join Date: Apr 2008
Posts: 4,270
|
Quote:
Originally Posted by HUMBER P4VWL
Been a while since I saw your midland mug TT! ;-)
go!
|
I'm still ansum bastard ..!!
__________________
When you get to the end of your rope..tie a knot and hang on..!!
Aberdovey Ribs
B.I.O.C.Member
B.S. LEADER
|
|
|
12 May 2016, 16:47
|
#311
|
Member
Country: UK - England
Town: brierley hill
Boat name: rocknrolla
Make: osprey
Length: 7m +
Engine: outboard
Join Date: Aug 2011
Posts: 713
|
Quote:
Originally Posted by Pikey Dave
Late comers to the party, but we're hoping to make this one. Looking forward to it.
|
No p diddy your names not on the list ur not cmm in
__________________
|
|
|
12 May 2016, 20:52
|
#312
|
Member
Country: UK - Wales
Town: Caernarfon
Boat name: Orca
Length: 6m +
Engine: 200hp Honda
Join Date: Oct 2010
Posts: 51
|
Evening All! as it looks like this cruise is going to be a big one I Just thought I'd post up how were going to be handling the launchings etc on Saturday.
Our setting down area and car park is relatively small and gets congested quite quickly on busy days such as this one, therefore upon arrival myself or Tom will be looking to unhitch your boat and move it with the Tractor down onto the foreshore as quickly as possible, once your boats there you can take as long as you like to take straps and towing gear off/ kit up etc.
Bill is going to be in charge of overseeing the parking of the tow vehicles, 4x4's can park on the grass verge and 2wd will be parked around the perimeter of the car park. This way we can easily accommodate everyone.
It looks like there is approx. 25+ ribs to launch and all for 10am, so we will be looking to start launchings just after 9am. Gary will be in the water undoing winch straps and ensuring your safely afloat, John will be assisting hitching and unhitching trailers higher up on the foreshore, this way me and Tom can go as quickly as possible with the Tractors. Most people prefer to be in the boat during launching which requires us to go deeper with the trailer for it to float off and not risk grounding the hull, if you prefer to be out the boat and therefore have a shallower launch, just let us know. Think I've spoke to most who are coming over on Friday and leaving there boats but just a reminder to give us a ring en-route if your eta is going to be after 7pm. Wish you all a safe journey here, need anything i'm on 07917859345. Chris.
PS: May I be the first to say well done to Nick for organizing this one, think you've done a very thorough job! if i'm still standing by 8pm i'll get you one in!
__________________
|
|
|
12 May 2016, 20:59
|
#313
|
Member
Country: UK - Wales
Town: west mids /tywyn
Boat name: HAWK
Make: RIBCRAFT/ Suzuki 250
Length: 7m +
Engine: Tohatsu 3.8/15hpsuzi
MMSI: 235086594
Join Date: Apr 2008
Posts: 4,270
|
Quote:
Originally Posted by Christycalch
Evening All! as it looks like this cruise is going to be a big one I Just thought I'd post up how were going to be handling the launchings etc on Saturday.
Our setting down area and car park is relatively small and gets congested quite quickly on busy days such as this one, therefore upon arrival myself or Tom will be looking to unhitch your boat and move it with the Tractor down onto the foreshore as quickly as possible, once your boats there you can take as long as you like to take straps and towing gear off/ kit up etc.
Bill is going to be in charge of overseeing the parking of the tow vehicles, 4x4's can park on the grass verge and 2wd will be parked around the perimeter of the car park. This way we can easily accommodate everyone.
It looks like there is approx. 25+ ribs to launch and all for 10am, so we will be looking to start launchings just after 9am. Gary will be in the water undoing winch straps and ensuring your safely afloat, John will be assisting hitching and unhitching trailers higher up on the foreshore, this way me and Tom can go as quickly as possible with the Tractors. Most people prefer to be in the boat during launching which requires us to go deeper with the trailer for it to float off and not risk grounding the hull, if you prefer to be out the boat and therefore have a shallower launch, just let us know. Think I've spoke to most who are coming over on Friday and leaving there boats but just a reminder to give us a ring en-route if your eta is going to be after 7pm. Wish you all a safe journey here, need anything i'm on 07917859345. Chris.
PS: May I be the first to say well done to Nick for organizing this one, think you've done a very thorough job! if i'm still standing by 8pm i'll get you one in!
|
Bet rocky rolls up at 9.59.
Sent from my iPad using RIB Net
__________________
When you get to the end of your rope..tie a knot and hang on..!!
Aberdovey Ribs
B.I.O.C.Member
B.S. LEADER
|
|
|
12 May 2016, 21:07
|
#314
|
Member
Country: UK - Wales
Town: Near oswestry
Boat name: Billy may
Make: Tornado 5.3
Length: 5m +
Engine: 90 yamaha
MMSI: 235109146
Join Date: Nov 2013
Posts: 119
|
Bloody hell Chris,after all that typing I bet your finger is sore now!!!!
Sent from my iPad using RIB Net
__________________
|
|
|
12 May 2016, 21:18
|
#315
|
Member
Country: UK - England
Town: Newcastle, Staffs
Boat name: Duma
Make: Shearwater Cutter
Length: 6m +
Engine: Yamaha 200hp
Join Date: Jan 2011
Posts: 507
|
Last List before the Big Day
Well here is the last list and PD has just made it! There is plenty of food available I am told the hog roast will feed 60 easily so any late comers will be most welcome. Just a reminder the evening do is upstairs at the Old Market Hall. The stairs are on the right as you go through the door. Meal tickets are available on the door at £12.50 each and food will be available from 8pm.
Thanks Chris for the parking and launching instructions.
Looking forward to meeting you all and have a great day!
Nick
__________________
|
|
|
12 May 2016, 21:28
|
#316
|
Member
Country: UK - England
Town: London
Make: Osprey ViperMax
Length: 6m +
Engine: 200HP Etec
Join Date: Jun 2003
Posts: 80
|
Rocky will roll up at 9.59 am and be back at 10.59 am. Hardly seems worth it!
Might see you all in the afternoon, as waiting for a fuel pump.
__________________
|
|
|
12 May 2016, 21:38
|
#317
|
Member
Country: UK - England
Town: South Yorks
Boat name: Black Pig
Make: Ribcraft
Length: 5m +
Engine: DF140a
MMSI: 235111389
Join Date: Feb 2008
Posts: 12,171
|
Round Anglesey for Macmillan 14/15 May 2016
Being a lazy git, could you post a link to the just giving page to save me trawling through the 300+ posts please.?
Sh1t happens
__________________
Rule#2: Never argue with an idiot. He'll drag you down to his level & then beat you with experience.
Rule#3: Tha' can't educate pork.
Rule#4: Don't feed the troll
|
|
|
12 May 2016, 21:47
|
#318
|
Member
Country: UK - England
Town: Newcastle, Staffs
Boat name: Duma
Make: Shearwater Cutter
Length: 6m +
Engine: Yamaha 200hp
Join Date: Jan 2011
Posts: 507
|
I set the target as £1000 for a great cause. Here is the link to the just giving website.
Current Total £370
https://www.justgiving.com/roundanglesey
__________________
|
|
|
12 May 2016, 21:51
|
#319
|
Member
Country: UK - England
Town: Newcastle, Staffs
Boat name: Duma
Make: Shearwater Cutter
Length: 6m +
Engine: Yamaha 200hp
Join Date: Jan 2011
Posts: 507
|
We have had a donation from HP with a message to say:
'Here's hoping the weather holds! See you there'
Thanks for your support HP!!!
__________________
|
|
|
12 May 2016, 21:52
|
#320
|
Member
Country: UK - England
Town: Newcastle, Staffs
Boat name: Duma
Make: Shearwater Cutter
Length: 6m +
Engine: Yamaha 200hp
Join Date: Jan 2011
Posts: 507
|
We have had a £10 donation from Robin Moran - Thanks a lot Robin.
__________________
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|