I am reluctantly selling my 2021 Honwave T38 airfloor (boat only, no engine) for one reason only, which is that I unable to easily move the deflated boat between car and storage at home. This is due to persistent - verging on chronic - back issues, so I have switched to the Elling 350 which can be transported as separate floor/boat sections, with the heaviest being 35kg - a big difference to the ~50kg of the Honwave.
Boat was new in July of 2021 and does have one patch over a scuff mark which caused a very slow leak (short drag on concrete in the bag - lesson learnt). Patch was made in good conditions with two part adhesive, and is effective. There is a thread about this repair in the SIB forum.
Wheels are Suprod fold flat (very strong), and have been upgraded to 260mm solid. Will supply original smaller wheels also.
Seanox sliding/removable transducer mount fitted. This is quite a nice bit of kit, and works well for even large transducers (Lowrance totalscan pictured). Will supply the sliding part but not the transducer! If not running with a transducer, the mount that remains on the transom is very low profile.
Also includes one Railblaza mount fitted (aft/starboard), Railblaza road holder and Railblaza sonar unit mount (unused - I have been using the seat). You can also have the wooden seat mounted sonar base if you want it - this is attached in a non-destructive way (wrap around) and easily removed.
Pics are from a little earlier this year, can get it out and get some new ones when we get a set of settled weather.
£1100 - pm me please if interested. Based in Chichester.
This pic shows the position of the railblaza mount:
