coil for 1987 mercury mariner 90 2 stroke

[swansea beast]

im trying to source a coil for a mates 1987 mercury mariner 90hp 2 stroke oil injection, ive taken the coil out and is stamped with code 1118 is this the code i need to relay when asking for info? and do anyone know where id be able to source one?

[Jeff]

This site may be useful
Evinrude Parts | OMC | Mercury Outboard Parts | Mercruiser Parts

They are also good at delivering to the UK if you are buying a few parts and the savings balance shipping costs

or

http://www.mercurypartsexpress.com/us/index.html

Jeff

[Boats&Outboards]

Thinks I've a used one, if you email me a picture I'll check to see if it's the same. Unless he wants new of course.

Peter

Peter ~ Boatsandoutboards4sale ~ askboatsandoutboards4sale@sky.com ~ 07930 421007

[swansea beast]

Originally Posted by Boats&Outboards

Thinks I've a used one, if you email me a picture I'll check to see if it's the same. Unless he wants new of course.

Peter

Peter ~ Boatsandoutboards4sale ~ askboatsandoutboards4sale@sky.com ~ 07930 421007

thanks peter

ill email as soon as i take pics,ive been told (by an untrustworthy source) that there may be different coils for different cylinders? is this true, they all seem to look the same

also as soon as i took the suspect coil out, the magnet around the coil broke up could this also be a problem on the engine?

everyone we`ve asked about the engine says that its a fueling problem but the guy we bought the boat off says that he was told a braking down coil, so we pretty much stumped lol

[ChasTheBoat]

We can probably supply this as we are a Mariner Mercury dealer and hold a wide range of spares.

You can call Paul in the office on 0208 788 4587 and he will be happy to help.

It would be useful if you have the model and/or serial number ready.

[Turbodiesel]

Do you have a serial number of the engine?

[swansea beast]

since my last post we`ve fitted new sparks and coils still not cured!!!!!!
shes lovely and smooth to half throttle 17-18 knots then bang she drops a cylinder, back off then she kicks back in, u can stay at half throttle all day and its lovely cruising at that speed just that u cant get full throttle.
any ideas lads?

[Jizm]

What revs is that?

Is it going into limp home mode?

[swansea beast]

dont know what the revs are as no rev counter
thats what i think how do you check this?

[Sea Witch]

Faulty temperature sensor Dropping it down to 2 cylinders ? It water jet pumping ok ? Is water hot from jet ?

[Turbodiesel]

Could be lots of things, possibly the high speed circuit in the stator, but you will need a DVA meter to get the readings.