Reply
 
Thread Tools Search this Thread
 
Old 25 September 2003, 22:20   #21
Member
 
Country: UK - England
Town: NW& wherever the boat is!
Boat name: depends on m'mood!
Make: Humbers/15-24m cats
Length: 6m +
Engine: etec130/big volvos
MMSI: many and various
Join Date: Nov 2001
Posts: 1,816
Quote:
Originally posted by Alex Brown
.... if I went over and there was someone else on board, they could either start the aux, or relocate the kill cord to the main engine controls, and use that instead.

-Alex
Good point - carrying a second kill cord in a prominent place is recommended, particularly with the type where a horseshoe type thingie goes ove the button and holds it out to run. Otherwise the helmsman goes over the side with the kill cord and the boat cannot be started to go and get him. Not so bad with the type that has a plastic loop going over a switch that can be flicked back up to run without the cord. Cos i spend a lot of time on other peoples/schools boats I have in my pocket one of those cords with just about every fitting known to man on the end, just in case
Oh by the way I'm a leg man - although I have seen the helmsman of a coastguard boat end up flat across the tubes but with the engine still running at full chat cos the cord had not moved far enough to cut the engine! I had to reach forward from the back pod to yank the cord out.
__________________
Dave M
www.wavelengthtraining.co.uk
wavelength is offline   Reply With Quote
Old 25 September 2003, 22:26   #22
Member
 
Richard B's Avatar
 
Country: UK - England
Town: Devon
Boat name: White Ice
Make: Ranieri
Length: 5m +
Engine: Suzuki 115hp
Join Date: Jul 2002
Posts: 5,015
Quote:
Originally posted by wavelength
Cos i spend a lot of time on other peoples/schools boats I have in my pocket one of those cords with just about every fitting known to man on the end, just in case
Nice one, Dave - I've always had one of these in the bottom of my rucsac just in case, and once it was actually useful! It was a Souwester part, so not sure where to get them from nowadays.
__________________
Richard B is offline   Reply With Quote
Old 25 September 2003, 22:34   #23
Member
 
Country: UK - Scotland
Make: HumberOceanOffshore
Length: 8m +
Engine: Volvo KAD300/DPX
Join Date: Oct 2002
Posts: 5,596
Quote:
Originally posted by Richard B
That's bordering on bondage, JW!
__________________
JW.
jwalker is offline   Reply With Quote
Old 25 September 2003, 22:44   #24
Member
 
Country: UK - England
Town: NW& wherever the boat is!
Boat name: depends on m'mood!
Make: Humbers/15-24m cats
Length: 6m +
Engine: etec130/big volvos
MMSI: many and various
Join Date: Nov 2001
Posts: 1,816
Quote:
Originally posted by Richard B
so not sure where to get them from nowadays.
I think compass stock em- but then again short term memory loss and all that.
__________________
Dave M
www.wavelengthtraining.co.uk
wavelength is offline   Reply With Quote
Old 25 September 2003, 22:46   #25
Member
 
Richard B's Avatar
 
Country: UK - England
Town: Devon
Boat name: White Ice
Make: Ranieri
Length: 5m +
Engine: Suzuki 115hp
Join Date: Jul 2002
Posts: 5,015
Short term, err, what?
__________________
Richard B is offline   Reply With Quote
Old 25 September 2003, 22:49   #26
Member
 
Country: UK - England
Town: NW& wherever the boat is!
Boat name: depends on m'mood!
Make: Humbers/15-24m cats
Length: 6m +
Engine: etec130/big volvos
MMSI: many and various
Join Date: Nov 2001
Posts: 1,816
Originally posted by Richard B
That's bordering on bondage, JW!
I could never get the knots right for that.
Perhaps I should try m'multi gadget kill cord instead
__________________
Dave M
www.wavelengthtraining.co.uk
wavelength is offline   Reply With Quote
Old 25 September 2003, 23:25   #27
Member
 
Country: UK - England
Town: SOUTHAMPTON
Boat name: Won't get Fooled Again
Make: Ribtec
Length: 6.5
Engine: Honda 130
Join Date: Mar 2002
Posts: 888
multi gadet kill cords available in towsure (they are on the web) for about £12:45
__________________
thewavehumper is offline   Reply With Quote
Old 26 September 2003, 08:04   #28
Member
 
Country: UK - England
Town: Rochester, Kent
Boat name: Circe
Make: Tornado
Length: 5m +
Engine: Yamaha 50hp petrol
Join Date: Jul 2003
Posts: 11
Has to be around upper part of the leg. That way it has two joints to slide over before coming off. As for the argument about the crew restarting the engine, what have you got paddles for?
__________________
John Gore is offline   Reply With Quote
Old 26 September 2003, 16:42   #29
Member
 
Country: UK - Scotland
Town: Falkirk
Boat name: a boat
Make: Narwhal
Length: 4m +
Engine: Force 40hp o/b
Join Date: Sep 2003
Posts: 112
I dont think it matters - as long as the killcord is secured somewhere to your anatomy - then it will work if you take a trip on the wet side. Me - I have it clipped to my lifejacket, but thats just cos thats the most convenient for me.

By the way whats all this talk about a crew? Never heard (nor had room for) the darn things - and if you are talking about spare keys et all for passengers, I'm not so sure I want to be in the water with some of the passengers I've had aboard bearing down on me! I would much rather they should be able to handle a throwline!
__________________
"Remember the Plug!"
Bill S is offline   Reply With Quote
Old 27 September 2003, 19:32   #30
Member
 
Country: UK - England
Town: NW& wherever the boat is!
Boat name: depends on m'mood!
Make: Humbers/15-24m cats
Length: 6m +
Engine: etec130/big volvos
MMSI: many and various
Join Date: Nov 2001
Posts: 1,816
Quote:
Originally posted by John Gore
As for the argument about the crew restarting the engine, what have you got paddles for?
With a bit of a wind and one person left on board they are purely decoration mate, just decoration!
__________________
Dave M
www.wavelengthtraining.co.uk
wavelength is offline   Reply With Quote
Old 28 September 2003, 19:38   #31
Member
 
Country: UK - England
Town: Rochester, Kent
Boat name: Circe
Make: Tornado
Length: 5m +
Engine: Yamaha 50hp petrol
Join Date: Jul 2003
Posts: 11
I've just spent a rather satisfying weekend running a safety boat course, watching the students trying to paddle a rib against wind and tide. In the end they had the idea of throwing me a line. It's amazing how quickly the penny drops when physical activity is involved!
__________________
John Gore is offline   Reply With Quote
Old 30 September 2003, 09:30   #32
Member
 
Country: UK - Isle of Man
Town: Douglas Isle of Man
Make: Osprey
Length: 5m +
Engine: Suzuki 70hp 4 stroke
MMSI: 235035776
Join Date: Dec 2002
Posts: 288
Paddles - forget it

Last winter I had the unenviable pleasure of swimming/wading about 3/4 mile around the edge of a reservoir towing a rib (not mine) when the battery failed.

Sadly I had the drysuit on so I got volunteered.

No tide (it's a lake remember) - 10 knots of breeze, 5m Humber, big wooden paddles, 15 stone reasonably fit dad, 12 stone karate black belt, rugby playing 15 year old...........

Couldn't move it an inch!

Morals of story....either get an auxiliary (with pull start), or make sure that there are two ribs out at all times.

Oh and get a new drysuit so I can give mine to son so he can swim next time!
__________________
Tax is paid by mortals
whitingiom is offline   Reply With Quote
Old 30 September 2003, 21:18   #33
Member
 
Country: UK - England
Town: SOUTHAMPTON
Boat name: Won't get Fooled Again
Make: Ribtec
Length: 6.5
Engine: Honda 130
Join Date: Mar 2002
Posts: 888
Quote:
Originally posted by wavelength
With a bit of a wind and one person left on board they are purely decoration mate, just decoration!
AN I must say the crew on Red mist are very decorative!
__________________
I need a little bit of Rhythym and a little bit of Blues
thewavehumper is offline   Reply With Quote
Reply

« Fin Repair | Top | LPG Gas »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 18:51.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.