Evinrude unveils new E-tec

Chris · 22 May 2014, 21:10

Lots of buzz on the US forums about the new range....

2 weeks to go...

BRP offers sneak peek at â€˜new eraâ€™ in outboards | Boating Industry

A1an · 22 May 2014, 23:03

That's some commercial for an outboard!

Bigtalljv · 22 May 2014, 23:16

not much info out there. Lot's of speculation and 17 pages of "Suzuki is better than E-tec" on the hull truth

gotchiguy · 23 May 2014, 10:52

Looking forward to this, they haven't made huge strides for a good few years now so I was anticipating this.

It's gonna be a RAVE!

Hightower · 23 May 2014, 15:00

Quote:

Originally Posted by gotchiguy

Looking forward to this, they haven't made huge strides for a good few years now so I was anticipating this.

It's gonna be a RAVE!

4stroke E-tec

Pikey Dave · 23 May 2014, 22:06

Quote:

Originally Posted by Hightower

4stroke E-tec

Don't laugh, My Stihl brushcutter has a 2-4stroke engine, it is a 4 stroke engine that runs on 50:1 mix, no sump or additional oil req'd.

Bigmuz7 · 23 May 2014, 23:49

Eeee lad ..when it runs ont cheese and toast tha'll be rich

willk · 23 May 2014, 23:56

Quote:

Originally Posted by Bigmuz7

Eeee lad ..when it runs ont cheese and toast tha'll be rich

Mmmmmm - Gorgonzola!

seazar · 28 May 2014, 10:46

I quizzed my local Evinrude dealer and the only thing he would say is that's it could be a Hybrid outboard and only available in the larger (e.g.150 HP and above)outboards.
He also said there would be one on display at the Melbourne Boat show which is on in about 2 weeks.

gotchiguy · 28 May 2014, 12:13

Quote:

Originally Posted by seazar

I quizzed my local Evinrude dealer and the only thing he would say is that's it could be a Hybrid outboard and only available in the larger (e.g.150 HP and above)outboards.
He also said there would be one on display at the Melbourne Boat show which is on in about 2 weeks.

I can't personally see it being a hybrid as that would remove one of the etec's key selling points - weight. Plus, there's no gap in the power where torque fill is needed!

Chris · 28 May 2014, 12:33

- 2 Stroke
- Bulit in Steering
- Very low oil consumption through recirculation of oil.
- Oil reservoir will be under the cowling

I cant see how they can improve much more, other than this its already a good motor !

SteveHall · 28 May 2014, 13:15

Cant wait to see these...

gotchiguy · 29 May 2014, 12:25

Quote:

Originally Posted by Chris

- Bulit in Steering

Power steering maybe

SteveHall · 29 May 2014, 13:03

I guess I am going to sound stupid now, but what's the difference between a standard and a HO? Other than id rather have a HO than a standard...

Looking at the 150 and 150 HO?

With a 20" Shaft they both weigh 190kg, both go upto 5850RPM..

Is the HO at the higher end of the 10% power variance allowed, so a 150 could have 143hp but a HO could be 159?

gotchiguy · 29 May 2014, 13:21

Quote:

Originally Posted by SteveHall

I guess I am going to sound stupid now, but what's the difference between a standard and a HO? Other than id rather have a HO than a standard...

Looking at the 150 and 150 HO?

With a 20" Shaft they both weigh 190kg, both go upto 5850RPM..

Is the HO at the higher end of the 10% power variance allowed, so a 150 could have 143hp but a HO could be 159?

Essentially yes. It's for the American bass boat tournament market where those 9hp make a big difference, and Mercury have XS and Yamaha Vmax. For a deep v rib there isn't much point IMHO, however the arguement is different between the 200 and the 200HO because there is a big difference in power and torque as one is 2.6L and the other 3.3L. Some of the HOs also have different gearboxes and gear ratios better suited for the bass boat type hulls although this is no longer the case for the 250HO.

It all depends on the boat really, in my opinion the best engine Evinrude makes is the 200. It is so light and so powerful it's awesome. However going up 30kg on a heavier boat may make sense as the torque difference is large.

SteveHall · 29 May 2014, 13:48

Ahhh! OK, It just seemed strange when I looked at the 150 as everything seemed identical...

Looking at the others it as you said, like the new 90HO seems to be a de-tuned 115. Although you have the weight I like the idea that its under less stress.

Hightower · 29 May 2014, 17:28

Doesn't the HO have a low water pick-up?

Chris · 29 May 2014, 21:06

Quote:

Originally Posted by gotchiguy

, in my opinion the best engine Evinrude makes is the 200. It is so light and so powerful it's awesome.

The 200 2.6 litre is not great on the power side, the 150 and 175 are excellent however the 200 gains top end power at the expense of low end grunt. Hence the 3.3 litre version...

SteveHall · 29 May 2014, 21:27

I love my 175

Sent from my iPhone using RIB Net

gotchiguy · 29 May 2014, 21:59

Quote:

Originally Posted by Hightower

Doesn't the HO have a low water pick-up?

The 250HO, 225HO and I think the 200HO used to have a different type of gearcase to the regular models which did have lower water pickups allowing the engines to be run higher. The 250HO doesn't have this type of gearbox anymore so there is no difference to the 300 however I'm not sure about the others. I think the 225HO still uses the L2 gearbox but I'm not exactly sure.

Obviously the lower water pickups make a much bigger difference to the bass boats with their hydraulic jacks, for us the beefier gearbox is much preferable.