I have a rib that has an Evinrude Etec 60HP engine. It will get a three year service in the winter, but I wanted to give it a bit of a helping hand through this summer with a little bit of tlc. Does anyone know where the grease points are that I should be concerned with? I can't find a reference in my manual.
Normally tilt tube and steering tube (axes that the motor tilts on and swivels on to steer.) On my Yam, there's 4 (I think) zerk fittings on the tilt tube, and 1 or 2 on the steering tube.
Probably worth pulling and greasing the prop as well.
As JKY says, + the cowl catches usually have grease nipples fitted on the Etec.
__________________
Rule#2: Never argue with an idiot. He'll drag you down to his level & then beat you with experience.
Rule#3: Tha' can't educate pork.
Rule#4:Don't feed the troll
BLACK PIG
Piglet
