Help Needed Guys

gibbo500 · 06 September 2009, 14:28

I have just had the skeg and prop repaired on the Yam 50. After inspecting the impeller and reattaching the leg on checking to make sure everything was ok, i noticed that in forwad gear when turning the prop clockwise it makes a loud clicking noise with little resistance. In reverse gear there is resistance and in neutral spins freely as it should.

I have yet to fill the gearbox with oil as i am waithing for new screws and washers to fit as i think i have a water leak somewhere.

Can anyone help or advise as i am close to selling up and taking up train spotting or butterfly catching....

PeterR · 06 September 2009, 14:59

That is if your still speaking to me.I,m sure you will find its adjustment on the gear change cable neads winding back or forwards cant remember which.regards Peter

gibbo500 · 06 September 2009, 15:58

Quote:

Originally Posted by PeterR

That is if your still speaking to me.I,m sure you will find its adjustment on the gear change cable neads winding back or forwards cant remember which.regards Peter

Of course i am and to prove it i will get you a beer a the gathering.