help ultraflex

[ddarren]

hi i have just bought a new Ultraflex B90 Outboard Single Lever Black Side Mount Remote Control Box and cables dont seem to work cables say on them quicksilver ft9 061
the engine is a mariner 40hp 6el
i was told the control would fit but need the Ultraflex K35 Connector Kit For C5 & C16 Outboard Remote Control Cables which i have fitted but not helping either so really confused do i need different cables
previously had a QuickSilver Outboard Side Mount Control Box fitted

[beamishken]

Sounds like you maybe have a box for 33c cables but you have quicksilver cables can you post a picture of the box internals

[Davie]

That should all work, have you got the round trunions on the cables in the correct holes.

[ddarren]

hi yes had them in the correct holes but were too short so couldnt be clipped so i then changed it so you have to pull instead of push which is what the photo shows , when you push the lever the rod only travels 60mm

uploaded photo of inside

[Davie]

You haven’t used the k35 kit to extend the length of the inner cable in this pic. Fit the kit and this will work.

[ddarren]

hi
even when i used the kit it still wouldnt work ,ther wasnt any movement