Honda BF50 Trim Pump Seals.

Mollers · 20 April 2011, 10:41

The BF50 on the SR4 will creap back down when trimmed. Oil appears to be seaping past the seals. Rang Honda, no parts available, replacement pump only @ £2k!

Any ideas?

Downhilldai · 20 April 2011, 12:01

Strip the seals out and take them to a bearing supplier - they'll almost certainly be able to match them up for you.

Alternatively, you may be able to get the dimensions of the seals with the help of Google?

Mollers · 20 April 2011, 12:43

Quote:

Originally Posted by Downhilldai

Strip the seals out and take them to a bearing supplier - they'll almost certainly be able to match them up for you.

Alternatively, you may be able to get the dimensions of the seals with the help of Google?

Got an exploded diagram from Challenger, Skippy is pulling it apart to do as you've mentioned.

Mollers · 20 April 2011, 16:18

Duchy Hydraulics supplied seals FOC, took one of our blokes 3hrs inc. driving to Duchy Hyd.

Leapy · 20 April 2011, 16:22

Quote:

Originally Posted by Mollers

Duchy Hydraulics supplied seals FOC, took one of our blokes 3hrs inc. driving to Duchy Hyd.

FOC/£2k...FOC/£2k...FOC/£2k

Good call!

Downhilldai · 21 April 2011, 22:07

Did you manage to sort it out, dood?

Mollers · 22 April 2011, 00:31

Quote:

Originally Posted by Downhilldai

Did you manage to sort it out, dood?

A couple more seals on the manual release valve sorted it.

Downhilldai · 22 April 2011, 00:51

Tidy job

Mollers · 22 April 2011, 10:59

Quote:

Originally Posted by Downhilldai

Tidy job

Goin' in today.