List Your Spare Props Here

[Tarbh]

Evinrude Viper 14 3/4 x 19, that came off a (2005) Etec 200, when i changed it for a 21"....

Perfect condition, open to sensible offers...

[mctaggart]

Looking for a prop to fit my mercury 75, two stroke. Currently on a 14" with 13 pitch but its needs more pitch, any help appreciated to test correct size.

[A1an]

Originally Posted by mctaggart

Looking for a prop to fit my mercury 75, two stroke. Currently on a 14" with 13 pitch but its needs more pitch, any help appreciated to test correct size.

How many splines?

[mctaggart]

Its 15 spline

[Chris Caton]

New, never been fitted Honda S/S prop 14 1/4 x 19.

Other markings on prop are:

362 x 483

58233-ZY3-A19H

[mick]

Originally Posted by Chris Caton

New, never been fitted Honda S/S prop 14 1/4 x 19.

Other markings on prop are:

362 x 483

58233-ZY3-A19H

Looks nice that Chris

[Chris Caton]

Originally Posted by mick

Looks nice that Chris

It is, too nice for me that's for sure, it's a loooooong story, I'll bore you with it tomorrow

[Boats&Outboards]

Here's a few props that have been accumulated over the last few months. Time to clear them out. Basic details below.

1) Yamaha NEW 13 /14 x 17 K Series 15 Spline New unused, boxed. P/N 6E5-45945-01-EL Was a spare for Yam F80 but will fit other models. £65

2) Yamaha NEW 14 x 11 - K Series 15 Spline. New unused spare. Ali 3 bladed P/N 6E5-45949-00-EL. Suggested suitable for between 60hp-140hp Yamaha Outboards. £65

3) Solas E15 x 19 RT 15 Spline. Polished finish marks to leading edges, needs cleaned up . Unsure what it came off £100

4) NEW BOXED Powertech 13 Spline 10.5 Diameter 12 Pitch RH Rotation 3.5" Gearcase fits 40-60HP Merc/Mariner and 25HP BIGFOOT models NEW UNUSED POLISHED STAINLESS. BOXED £120

5) Michigan 013027 - 13 spline 13 1/4 x 17 £100 Slight scuffs to edges. Polished Stainless finish. Suit OMC 90+ 1981> may fit other makes. £100

6) Solas TITAN NEW D3 x 13 13 3/4 x 15 Pitch Polished Stainless RH rotation As New, unused (tested only). 15 Spline For "High Power Applications" unsure what its suited for without checking. £140

7) Unknown make VS1700 - 13 Spline 13 1/4 x 17. Almost unmarked - possibly refurb'd ? Brushed Stainless finish. Fits Suzuki DT 115 + may suit others £100

Pictures of each available. Please do your own compatibility checks as the info above is all I know on each of them. Delivery available.

Peter @ Boatsandoutboards4sale ~ www.BoatsandOutboards4Sale.co.uk ~ 07930 421007

[freespirit3]

Redbay storm force prop advice
I have recently bought a used storm force 6.1 complete with a Suzuki df140, the engine has low hours and runs sweet. I understand that the boat was delivered with a 14 x 21 aluminium prop and still has the same, the propller is in very good condition, I have recently used the boat on a family holiday and noticed that even with just one person i could not get the engine above 5400 rpm trimmed out. I also noticed that when I had three or more young adults it was not that fast out of the hole. I appreciate it is quite a beamy boat so didn't expect an F1 car performance.

Do any of you have any experience with this hull, I know that propellers are not an exact science. Funds are tight so can't really stretch to a stainless 14x20, I am thinking of either sending my own aluminium off to have the pitch changed to a 19 or try and find another prop to try before I buy.

I have access to a 13.75 x 19 but not sure if that will benefit me?

Any advice would be welcome

[jumpinjack]

Donegal dan on here has a 6.1 with suz 140. She is quick. Am sure he will be along when he sees this post or pm him.

[freespirit3]

Originally Posted by paulbryson75

Donegal dan on here has a 6.1 with suz 140. She is quick. Am sure he will be along when he sees this post or pm him.

Thanks for the message, it will be interesting to see what configurations your friend has

Many thanks

[willk]

Originally Posted by freespirit3

Thanks for the message, it will be interesting to see what configurations your friend has

That's the boat I was referring to on the other thread - so you already know - they're virtually identical. I think he's running the stock prop too.

[J@mes]

Hi there,

After an 11 x 15 propeller for my Tohatsu 50HP TDLI outboard. Has anyone got one?

Thanks,
James.

[Bigmuz7]

Anyone got a 13x19 for my yam 75 ?

[A1an]

Iirc there is a stainless one on eBay at not too shabby a price.

Il see if I can find it.

*EDIT*

It's gone, I was tempted to buy it myself but I use a 17.

[Hightower]

Evinrude/BRP/OMC Stainless L/H Viper 143/4" Diameter X 21" Pitch 3 Bladed Propeller. Part # 176902 perfect in every way

Looking to Swap or to purchase a 17" pitch L/H of the same type.

[HughN]

Spare prop: Mariner/Mercury 3" hub, 10" x 19". Small diameter, big pitch!

[paddlesteamer]

got a suzuki dt 140 with a 13x19 prop 0n 5.5 rib can anybody tell me if this the best setup or should i be look at a different prop ? the boat is fast but thirsty.

[Portholme]

On ebay currently is an immaculate prop i bought unused and ran for a few hours before deciding that it is the right size and therefore I would buy a stainless one to that pitch.

mercury mercruiser propeller | eBay

£10 to MacMillan if i sell it through Rib Net

[Jeff Hutcheon]

Given my spare prop to whisper for the mac project!