List Your Spare Props Here

[Under the Thumb]

Solas New Saturn C3 11" diameter 15" Pitch stainless steel propeller

To fit any Mercury / Mariner / Tohatsu outboard engine with a 3 1/2" gearcase and 13 spline shaft.

Bought brand new from Steel Developments. It's done about 10 hours on our Thundercat but was a bit too lively. Excellent Condition.

£140

can post to anywhere in the UK for £8.50

[freespirit3]

Originally Posted by A1an

Just list them on this thread.

Pair of genuine Suzuki propellers for sale 3 x 14 x 21 3 blade aluminium R/H rotation, part number 58100-90J21-019

Suitable for Suzuki DF 90, 115 and 140 2001>

In my endeavour to find the right prop for our boat, bought these as a pair.

both brand new and never been fitted, already have my original 14x21 and after some recent testing with some alternative props will continue to look for a stainless 14x18 (will keep looking)

£75 each plus £15 post to UK or can collect if you prefer

Please pm me if you are interested

[freespirit3]

Please see another picture, never fitted or used

[freespirit3]

Please see below an extract from the on line propeller chart from Suzuki, thought this may assist

Understand that these will fit the Johnson 4 strokes too again the same age

[lukewhiting]

Looking for a 13 spline 16pitch or bigger stainless steel propeller for my 50 tohatsu on my thundercat.

[solent spence]

Mercury Revolution 4 RH 19P

Does anyone have, or know of one for sale?

[henryfreston]

anybody got a 10 3/8 x 14P 13 spline prop for sale?

[matt h]

Speak to Rob at Black dog marine in looe. im sure he just taken one in, almost new

[Chris Caton]

Originally Posted by Under the Thumb

Solas New Saturn C3 11" diameter 15" Pitch stainless steel propeller

To fit any Mercury / Mariner / Tohatsu outboard engine with a 3 1/2" gearcase and 13 spline shaft.

Bought brand new from Steel Developments. It's done about 10 hours on our Thundercat but was a bit too lively. Excellent Condition.

£140

can post to anywhere in the UK for £8.50

have you still got the prop and if so do you know if it will fit a 2012 Honda 50bf?

[J@mes]

Hi there. After a 13.5" or 14" pitch prop for my 50HP Tohatsu if anyone has one? Inbox me. Cheers

[Jon.esp]

I am looking for a prop for my Yam 6c auxiliary. It had a 8½ x 6½ which is the 7 spline. From what I can tell the Yam product number is 6G1-45947-00-00. It has been suggested that if I found one I could go down an inch in pitch but I don’t think it is that crucial.

Any ideas where to get one from?

Thanks

Jon

[Roflhat]

We've got a 17p LH (Left Hand) prop for a yamaha 420 STI 240hp. Brand new, unused, bought in error. Looking for £750 or a swap for the same prop in 19p (still left hand).

[Hightower]

Originally Posted by Roflhat

We've got a 17p LH (Left Hand) prop for a yamaha 420 STI 240hp. Brand new, unused, bought in error. Looking for £750 or a swap for the same prop in 19p (still left hand).

Any ideas if this is interchangeable with an Evinrude prop? If so I have a 19" or 21" lh prop I could swap.

[Roflhat]

Originally Posted by Hightower

Any ideas if this is interchangeable with an Evinrude prop? If so I have a 19" or 21" lh prop I could swap.

Sorry for the delay, I'm not too sure? I'll try and find out and get back to you

[Roflhat]

Originally Posted by Hightower

Any ideas if this is interchangeable with an Evinrude prop? If so I have a 19" or 21" lh prop I could swap.

What model Evinrude is it? Could you check how many splines it's got?
Cheers

[DJS]

Hi Folks

Seeking a Laser ll 20p prop, must be in good condition.

Cheers

[Hightower]

Originally Posted by Roflhat

What model Evinrude is it? Could you check how many splines it's got?
Cheers

Evinrude 150 di/ficht 15 splines I believe but I'll confirm that

[Roflhat]

Originally Posted by Hightower

Evinrude 150 di/ficht 15 splines I believe but I'll confirm that

Cool, I'll have to check the yam prop. Tried a search online to see if they're interchangeable but I'm still not too sure...

[Tony Barber]

Hi,

I have 2 19" Rebels & 2 19" Vipers surplus the requirements.

The Rebels have just been refurbished by Steel Developments so are like new. They are the newer TBX hubs. One std and one counter rotation.

The Vipers are the older type hub with a rubber bush. Good condition but not like new. Again, one std & one counter.

Get in touch if of interest.

Thanks,

Tony

[Petrov]

Hi; does someone have a Bravo 1 lab finish 28 pitch on the shelf?