List Your Spare Props Here - Page 4

GordyP · 01 September 2009, 11:44

Two props which came with my old engines, they are very used and a bit ragged round the edges but free to a good home!

Jonny H · 08 September 2009, 22:40

wanted 15 p prop for Merc 40 hp year 2000 would like a Solas stainless if poss !

Zubenelgenubi · 10 September 2009, 16:44

WANTED:

Mercury Laser II Stainless Steel 3 Blade 13 1/4 Diameter X 20" Pitch

Hightower · 10 September 2009, 19:14

Michigan Wheel Rapture Stainless 17" pitch x 15" Dia x 3" Blade RH no longer available.

Still available BRP Viper. 21" Pitch X 14.75" Dia X 3 Blade LH or CCW rotation. Suits all modern Evinrude outboards and looking to swap this Prop for either a 19" or 17" prop of the same dimentions.

Stuart M · 16 September 2009, 22:05

Came off my Honda BF90. In very good condition. Part Number 033084

Give me a call on 07850-796666 if interested.

Located near Fareham, Hants

also have a aluminium prop with 48-72764-17 on the hub and 48-72764A-4 17 on the prop.

stingraymax · 28 September 2009, 09:42

Posted it in bits & pieces

http://rib.net/forum/showthread.php?t=32429

Foggy · 29 October 2009, 16:13

I have a pair of counter rotating props for sale - please see
http://cgi.ebay.co.uk/ws/eBayISAPI.d...STRK:MESELX:IT

rib-x450 · 27 December 2009, 14:24

Stainlless propeller for 100hp 2 stroke mercury and similar models.

Quicksilver make, 18 pitch may fit simliar models.

Can post if anyone wants it.

Contact to disucuss a price as the post says no prices?

Zubenelgenubi · 27 January 2010, 11:52

Quote:

Originally Posted by Zubenelgenubi

WANTED:

Mercury Laser II Stainless Steel 3 Blade 13 1/4 Diameter X 20" Pitch

Got one from Aquatec.

gtflash · 04 March 2010, 17:05

wanted, to borrow or buy, mercury bravo1, trophy and tempest. any pitches between 19-24

keith m · 06 March 2010, 10:16

prop wanted for a 2001 50hp yamaha 11 1/8 13 i think

max · 03 April 2010, 12:57

Quote:

Originally Posted by Chris

2 x New and boxed BRP Evinrude / Johnson 19" Aluminium Props suitable for Etec 90 / 115 and the older V4 engines

1 x Used 17" Johnson Prop (OMC) one minor ding but no major damage

1 x Quicksilver Silverado 18" Stainless Steel Prop with Flo Torque Hub for Johnson / Evinrude engines can be fitted with other hub kits for different engines.

All Props are standard rotation.

outher question with prop are you useing now on your e tec?
because im getting an etec aswell and im curious to see what outher people are having.

bosun · 20 April 2010, 14:40

I've got two michigan wheel stainless props 16 1/2 inch pitch RH to fit evinrude 4 1/4 hub 13 spline legs and a 15'' Stainless to fit the same,all gone for refurb to make them lovely for a new owner
Also fit suzukis apparently.
The odd pitch is because they were re pitched for the RNLI

Ian M · 02 May 2010, 19:57

Can anyone help with the loan of a 14.75 x 21 prop for an etec? I am currently running a 19" Viper and fear I might see the pistons through the cowling one not so fine day, so would like to see what a 21" will do for it

Chris · 02 May 2010, 20:47

Quote:

Originally Posted by Ian M

Can anyone help with the loan of a 14.75 x 21 prop for an etec? I am currently running a 19" Viper and fear I might see the pistons through the cowling one not so fine day, so would like to see what a 21" will do for it

Out of interest, what RPM are you getting in the end Ian?

Chris · 02 May 2010, 20:55

.

Ian M · 02 May 2010, 21:14

Straight up to 5800, with absolutely no hesitation, at which point I decided that I really did not want to view my engine internals, so I feathered the throttle.

Chris · 02 May 2010, 21:48

Quote:

Originally Posted by Ian M

Straight up to 5800, with absolutely no hesitation, at which point I decided that I really did not want to view my engine internals, so I feathered the throttle.

FYI, Your target is 5,750 at WOT trimmed out, normal load.

TMB · 02 May 2010, 21:52

I have a brand new still boxed mercury Trophy plus prop 19 pitch
The prop is suited to nearly all engines above 75hp as it has a flo-torq II kit.
£

Ian M · 02 May 2010, 22:00

Quote:

Originally Posted by Chris

FYI, Your target is 5,750 at WOT trimmed out, normal load.

Yes, Its the normal load that might present a problem. I was one up with something over 200 litres of fuel on board (and of course trimmed out), and suspect that a lot of my running will be with similar load levels. However, there may be times when I will be carrying a lot more load, and so I think that I want to keep the 19" as a spare/alternative prop. So, I think a 19" and 21" might be a good combination, but I want to try a 21" before I buy