List Your Spare Props Here - Page 9

DJS · 10 September 2012, 16:49

I am currently running a 15 Pitch (13-3/4x15) RH Mercury propeller; part number 77342A45 (4 stroke 90 hp mercury on a 16 foot boat).

I am reaching the rev limit before triming, hence I am seekeing a 17 or 19 pitch prop. None of the local dealers (at present) have one I could try, hence if I could find a cheap second hand one that would be great!

Cheers

lukewhiting · 10 September 2012, 19:51

Quote:

Originally Posted by amityslave

Thanks Luke, I have been put right by another member and picked up a new stainless prop for £120.

Much obliged
AMiTy S

Stainless steel...good choice!

DJS · 10 September 2012, 22:44

Quote:

Originally Posted by lukewhiting

Stainless steel...good choice!

Would be delighted to go stainless but need to get the sizing correct first! who is the supplier?

lukewhiting · 10 September 2012, 23:02

Quote:

Originally Posted by DJS

Would be delighted to go stainless but need to get the sizing correct first! who is the supplier?

im not really sure to be honest. depends where you are! Id say the first place to try would be local marinas & workshops to see if you can find some more info & maybe buy or test some stuff. If not try further a feild or trawl the interent i geuss

npm108 · 07 October 2012, 17:59

Solas Myth 15 Pitch 3 Blade Alu Prop suitable for D sized gear cases with 4.1/4" gear case

Solas Alcup 4 13.25x13P reworked by Steel Developments to a 14P

Under the Thumb · 29 October 2012, 15:54

Stainless Solas C3 11" diameter x 15 pitch fits mercury / mariner 3 1/2" gearcase 13 spline. mint condition,

Mercury 23 Pitch 14" Black Max Aluminium Prop 48-67874A4-23
Used but in serviceable condition. All blades are in good order with no damage or chips. has had a coat of paint that has started to flake off. Prop has been stored in the workshop for the last 10 years without use.

Downhilldai · 09 November 2012, 12:51

Looking for a 15" pitch prop for a Soozook DT25. Any Soozook 20-30hp, 2-stroke or 4-stroke will have the same fitment.

Johnscubanut · 21 November 2012, 23:05

We have for sale a Yamaha 17inch pitch propellor from our Yam 115 four stroke. Used only twice & in almost new condition! Would like to exchange for a 13 or 14inch (if they do one?) We're running a heavy dive boat rib & sometimes need to drop the pitch down.
Would sell the prop for £60 if anyone interested? Cheers-John

Gramas · 27 November 2012, 18:12

Hi there I'm new to prop scene & what is recommended for my yam 90 auto?Boat mainly used for flying about, bit fishing & exercises with the rnli I'm crew with. Looking for something that is going to complement i all round, will find out weekend what's already on

9D280 · 05 December 2012, 14:58

Quote:

Originally Posted by Downhilldai

Thanks - I can wait a couple of months.

I've run it with 3 different pitch props: 12" and 13" were both too fine and the 15" was too coarse, so you can see where my conclusion is leading......

The motor's max rpm is 6000 and it only reached 5600 with 1 person on board, running the 15", so I reckon 14" should be spot on.
I've still got the 12" and 15", but the 13" was only with me on a temporary basis.

2 years later......

Do you still havre these?, and what diameter are they? I clocked a touch over 6K on an engine "maxed" between 5300-5800. I have a 13" of unknown diameter. I have also discovered merc 13 spline props appear to come in two diameters. It strikes me the 15 might be OK if it is less diameter than my current 13.

Downhilldai · 05 December 2012, 16:19

Quote:

Originally Posted by 9D280

2 years later......

Do you still havre these?, and what diameter are they? I clocked a touch over 6K on an engine "maxed" between 5300-5800. I have a 13" of unknown diameter. I have also discovered merc 13 spline props appear to come in two diameters. It strikes me the 15 might be OK if it is less diameter than my current 13.

The box says 10 1/8"

dobra## · 23 December 2012, 14:58

Any one got a prop for a 2004 yamaha 20hp 2 stroke. It is the same as the 25hp motor.
My bush has spun and cant get it back on. I would use steel developements but they are shut till new year. So just seeing if anyone would have anything.
I have just bought the motor and it needed work which has been done but I cant test it.

Cheers dobra##

simsy · 08 January 2013, 20:33

Wanted a 10 x 11. Prop for a tohatsu..
10.5x 11. Or 10 x 11.5. Ok etc....

To lend or buy

10 spline..

dougcrock · 05 February 2013, 10:02

http://www.rib.net/forum/f10/props-o...tml#post514847

see bits and pieces

simsy · 07 February 2013, 13:52

I have a mint Tohastu (off a 30hp efi)10 spline 9.9 x 13 inch white ali 3 blade prop for testing only, not for sale. Available for testing.....

Jeff · 20 February 2013, 15:47

I have a spare RH 19P Laser II for 150HP + V6
Hardly used and as new - used on my old 150 Opti 6 or so times before fitting a Revolution 4
I was keeping as a 'spare' but no need really as I also have a 21"P which came with my 175.
Open to sensible offer
Jeff

DJS · 24 February 2013, 07:52

Hi Jeff

Pm sent!

Cheers

Jeff · 27 February 2013, 23:28

Quote:

Originally Posted by Jeff

I have a spare RH 19P Laser II for 150HP + V6
Hardly used and as new - used on my old 150 Opti 6 or so times before fitting a Revolution 4
I was keeping as a 'spare' but no need really as I also have a 21"P which came with my 175.
Open to sensible offer
Jeff

Sold thanks
Jeff

simsy · 01 March 2013, 14:49

Would like to swop for a lower pitch (10 to 11 inch pitch wanted)

I have a mint Tohastu (off a 30hp efi)10 spline 9.9 x 13 inch white ali 3 blade prop for testing or sale, now for sale.

Miller · 01 March 2013, 20:54

http://www.rib.net/forum/f10/number-...0-a-43676.html

The Navman has gone....And I ve learnt to spell fuel properly!!