List Your Spare Props Here

[Chris]

Do you have spare props that you are happy to lend someone so they can test or with a view to possibly selling, then list them here!

The idea is No Prices as the purpose of this thread is just to share information on what props everyone has knocking about. People can then contact you directly and you can agree between you how you want to proceed. You may be happy to lend the prop for a test or, if its a newcomer to the forum you may insist on a purchase or deposit before you send the prop.

Chris

[Chris]

2 x New and boxed BRP Evinrude / Johnson 19" Aluminium Props suitable for Etec 90 / 115 and the older V4 engines

1 x Used 17" Johnson Prop (OMC) one minor ding but no major damage

1 x Quicksilver Silverado 18" Stainless Steel Prop with Flo Torque Hub for Johnson / Evinrude engines can be fitted with other hub kits for different engines.

All Props are standard rotation.

[PeterR]

I have one brand new 17 inch evinrude for 90-115 its the standard fit ali one

[ian parkes]

I also have a 13 1/4 x 17 standard alloy prop from etec90 as new would swap it for a 15" pitch or sell .

[Nos4r2]

I have (all fit Yamaha K series 75-90hp 15 spline 4" gearcase)

13.25x15" genuine Yamaha aluminium(badly damaged blade-needs to go to a prop shop. Free to whoever wants it)
13.25x17" genuine Yamaha aluminium
13.25x19" Propulse plastic jobby-haven't tried it out.

Might have a Michigan Wheel Rapture 13.25x17" stainless too-not sure if I like it yet.

[toby4594]

12.5"x19"x4 Blade Ali Prop
Suzuki 15 Spline
4 1/4" Gearcase

[Nos4r2]

Found a damaged 10 3/8x14" Merc/Mariner prop from my SR4/mariner 50 in the garage earlier. Free to anyone who wants to have it fixed as it'll be cheaper than buying a new one.

[roofer]

29 hydromotive quad iv 4 blade
26 trophy 4 blade
25 renegade 4 blade fits omc and merc
pair of 23 mirage plus with flo torque hubs
24 chopper lh

All merc fitment.

[9D280]

Originally Posted by Nos4r2

Found a damaged 10 3/8x14" Merc/Mariner prop from my SR4/mariner 50 in the garage earlier. Free to anyone who wants to have it fixed as it'll be cheaper than buying a new one.

Nos,

How many splines / shaft dia etc? Also just how bent is it?

[Brian]

I have a Bravo 1 prop.
It is Left-hand, Stainless Steel, 4-Blade, 24 pitch uprated by Steel Developments to 24.75.
Mercury Part no. 48-831911A55

Anybody interested?

[matt h]

13.25x17" genuine Yamaha aluminium

Nos, need to try that prop, what do you you think about it on mine,

[Nos4r2]

Originally Posted by 9D280

Nos,

How many splines / shaft dia etc? Also just how bent is it?

Sorry, missed this! 15 spline. Don't know shaft diameter-it's too greasy in there to get a tape measure in. It needs a big chunk of a blade replacing.

[Nos4r2]

Originally Posted by matt h

Nos, need to try that prop, what do you you think about it on mine,

You'r welcome to try it mate. Want me to drop it in next time I'm passing your parents?

[matt h]

cheers, that will be superb, would be great to give it a go

[Lostboy]

Evinrude standard-fit aluminium 15 pitch for 90-115hp.

[ian parkes]

Originally Posted by Lostboy

Evinrude standard-fit aluminium 15 pitch for 90-115hp.

Thats what I need

Do you want to sell it or swap for a 17 pitch original as new

[JABS]

I have a Mercury 14 dia 18 pitch stainless prop which I don't need..
Evinrude 14 dia x 23 pitch sainless prop which is way to coarse

Would like to try an Evinrude 14 1/2 dia by 19 or 18 pitch prop please.

Can collect/deliver/ A3 corridor.

Tony.

[matt h]

Quicksilver 13 x 19 Stainless steel, lovely condition, for Yamaha K series spline,

[rib-x450]

I am after a few props to try if anyone has on to lend or sell...........

WANTED WANTED WANTED.............

Part number required I think are:

48-73146A40 10 inch dia 19 pitch


48-73144A40 10 inch dia 17 pitch


Many thanks


Chris

[Daveboy 71]

1 x Used (1 yr old; good condition) BRP Evinrude 21" Viper SS Prop suitable for Etec 115 and above engines.