Mariner 40 6e9 L 358385 - replace engine mounts

[Batfink]

Hi

I've been informed that my outboard engine mounts (upper and lower) need replacing. I've looked into my options with one being to replace them myself (cheaper than getting my resident mechanic doing it and I've got the patience and time for it).

I am however having difficulty sourcing the parts I will need to do the job.

Please can someone point me to a suitable vendor (in UK if possible)?

thanks
Batfink

[uncle al]

any merc/mar dealer in the U.K. or Channel islands.You could try blackdog marine he is on this site omongst other dealers.

[diver 1]

Ribs Marine in Christchurch, Dorset. Fast and cheap. Genuine parts, well recommended.

I had two of those engines on my last rib and replaced all the mounts. you will need a new powerhead and exhaust gasket too as the old ones will not come out cleanly.

Also get some good cobalt HSS drill bits and plenty of spare M8/10 bolts as you'll be almost certain to snap a few off trying to get the powerhead off!

A can of plug gas really helps loosen things up too! I have pictures somewhere of doing mine if you need any more help

[Turbodiesel]

Good call uncle al! If you do talk to anyone in the office make sure you tell them your on Ribnet to get your discount!

[uncle al]

Hi Robby, yep I still have some uses. Dont nobody answer that as you might hurt my feelings, if I had any.