Parts Needed - Yamaha Sterndrive

[cdilljr]

I have a Yamaha Diesel w/ Hydradrive sterndrive. Problem is that I'm in the US and there is no help with these here (apparently lawyers were involved). Anyway, my current problem is with an intermediate shift cable. I need to purchase the cable along with any other parts that will be required to get that cable replaced (gaskets, etc.).

I could also use a gimbal bearing boot.

[Ezgoing]

C

Check out Redbay boats. they are the biggest installer of yamaha outdrives in Europe.

WWW.redbayboats.com

[biffer]

Originally Posted by Ezgoing

C

Check out Redbay boats. they are the biggest installer of yamaha outdrives in Europe.

WWW.redbayboats.com

i doubt that, but even if you are these parts are ready available from yamaha, you may fit a lot but i bet you still order in your parts from yamaha like the rest of us

[biffer]

Originally Posted by cdilljr

I have a Yamaha Diesel w/ Hydradrive sterndrive. Problem is that I'm in the US and there is no help with these here (apparently lawyers were involved). Anyway, my current problem is with an intermediate shift cable. I need to purchase the cable along with any other parts that will be required to get that cable replaced (gaskets, etc.).

I could also use a gimbal bearing boot.

try boatparts@boatsunlimitedny.com there in newyork they have all your bits you need listed, try www.boatsunlimitedny.com/yamaha_sterndrive.htm i think thats the page you need

[cdilljr]

You have no idea how long I've been searching for a US dealer for these parts. And I live very close to New York. I cannot figure out for the life of me why I haven't found them sooner. I'm good with google searches and such and have failed and YOU have come through. Thank you very much!!!!!!

[biffer]

my pleasure

[willk]

Originally Posted by Ezgoing

Check out Redbay boats. they are the biggest installer of yamaha outdrives in Europe.

Originally Posted by biffer

i doubt that, but even if you are...

He's an owner, not the Manufacturer. If he had been a Redbay rep, then it seems a little unsporting to doubt a man's word and with the next breath say "but if you're not lying then you're still whatever...".
That's not a touch of cabin envy I hear there Biffer, is it?

See:
http://www.redbayboats.com/news/Issue%2005.pdf Page 2
http://hotribs.com/06ribmakers/redba...dbay-boats.htm

Originally Posted by biffer

my pleasure

Mine too

[biffer]

no envy here, i don't mind what other rib builders do, i just said it as i see it, sorry if he is only a guy who own's a redbay but even so i wouldn't have sent a guy from the states to ireland for some bits, i could have supplied him with the bits myself, but i didn't, i sent him to a place near his home, redbay may do maybe 100 sterndrives a year on ribs and they maybe the biggest in europe but i still doubt they have these bits on the shelf, what i offered the guy was a direct route to his problem without pushing my boats at all, merry christmas!