Smartcraft software

[JimRib]

Anyone know if you can change the software on a smartcraft tach ?
I've picked one up to replace a broken one but it's got newer software on it and has different info than the old one, but also takes away data from the speedo ! And it's the fuel tank info [emoji51]

[Phil M]

Is it set up correctly? You can choose what data shown on the versions I have by enabling or disabling in the setup. Not sure what software version they are but can check this evening.

Phil

[JimRib]

Thanks, that would be great.

[gpsguru]

This might help ........... it is the same as the manual that came with mine ...

Nah ...... it wont help as I cant get the link to work and Ribnet does not seem to allow a PDF attachment

[Waterman]

SMARTCRAFT gauge
on smartcraft guages with 'VDO' on them you hold '+' & '-' then switch the key on, then hold down 'MODE' for 2 seconds to enter calibration settings.

[Jeff]

Here is a link to the earlier ones (which your look like)

https://dmna.ny.gov/nynm/manuals/Mer...ons_Manual.pdf

and later ones with descriptive text feature

https://mercurymarine-gsdesign1.netd...ners_guide.pdf

Installation guides

http://www.criboats.com/wp-content/u...tion-Guide.pdf
http://www.drev.se/Upload/DocumentMa.../smartwire.pdf


Jeff

[Turbodiesel]

Pull the gauge out look at the back of the gauge and it will have the gauge version written on the back