Smartcraft wiring-2002 Opti 225

[Jizm]

Originally Posted by Nos4r2

Ok, from intensive research so far.

You should be able to split the NMEA 0183 output from an HDS unit into 2 to run both Smartcraft and DSC.
In your GPS, enable NMEA output, set the baud rate to 4800, and enable the following sentences RMB, RMC (for the SmartCraft) and GLL (for the VHF).

NMEA data and
Hooking your GPS to the Smartcraft Speedo/Vesselview

are useful references.

Cheers for the info Nos.

[Nos4r2]

Originally Posted by Jizm

Cheers for the info Nos.

If you get to use it before I do, let me know if it works

[Jizm]

Originally Posted by Nos4r2

If you get to use it before I do, let me know if it works

And vice versa mate....

[Turbodiesel]

Not to sure to be fair, only really had dealings with Nema2000 stuff and smartcraft gateway stuff.