Tohatsu m50d2

[Seabass and cuda]

Starts up ok ticks over revs free then engage gear and revs but drops and slight misfit
Carbs off cleaned
Filters done
Fuel ends and lines done
Fresh fuel
New plugs
Any ideas

[matata]

check the compression..have a look at the plugs while your at it...10 min job

[carldalmas]

Originally Posted by Seabass and cuda

Starts up ok ticks over revs free then engage gear and revs but drops and slight misfit

Carbs off cleaned

Filters done

Fuel ends and lines done

Fresh fuel

New plugs

Any ideas

Hi
I had same problem ? With 9.8 hp two stroke
Turned out to be main jet ! After cleaning and rebuild in carb long tube think with 6 or 8 side holes
bit off shit blocked one hole ! Or check for air leak on carb gasket ! When you clean them sometimes repeat it again !

[Seabass and cuda]

First things I checked as good as new

[jeffstevens763@g]

found this has troubleshooting chart if you havent one. fuel pump diaphragm damaged/hole


http://www.tohatsu.de/media/docs/upl..._OM2016_en.pdf

[Seabass and cuda]

Trying to find the parts for the pump as it’s built on to bottom carb

[spartacus]

These guys are excellent. Tohatsu outboard engine parts - sales - service

[lukewhiting]

It’ll be one of the coils, common fault on these

[Seabass and cuda]

Yeah going to order one anyone know what size fuel pipe gos on the carbs

[Roflhat]

Coils definitely worth a shot, I've had it many times, feels like a fuel issue but most of the time it's a dodgy coil