Reply
 
Thread Tools Search this Thread
 
Old 23 July 2022, 15:21   #1
Member
 
Country: USA
Town: Taylor, MI
Boat name: Mr. Dinghy
Make: Caribe
Length: 4m +
Engine: Outboard, gas, 50
Join Date: Jul 2022
Posts: 4
Top speed.

Yesterday I took my new to me 14ft Caribe with a 50hp Honda 4 stroke out for the first time. I got it to 30mph and I'm kind of disappointed as I expected more for some reason. I'm not sure what prop is on it since there's no markings except an "R" cast into. I'm assuming it's the stock prop. I guess my question is what kind of speed should I expect from a rig like that? Thanks guys!
__________________
Yeti is offline   Reply With Quote
Old 23 July 2022, 20:50   #2
Member
 
Country: UK - Wales
Town: Cardiff
Length: no boat
Join Date: Aug 2014
Posts: 2,018
Can’t help with the speed but noting rpm will help a lot it’s a tricky balance of prop and rpm to get top end speed…
__________________
HDAV is offline   Reply With Quote
Old 23 July 2022, 22:51   #3
Member
 
Country: UK - England
Town: Leicester
Length: 5m +
Engine: 135hp Mercury
Join Date: Sep 2013
Posts: 1,431
Load the boat with the load you will normally carry.
Properly trim.
Using a tacho make several wide open throttle runs.
Note the revs.
Look up the spec for your engine & see if the WOT revs are within the manufacturer's recommended range.
__________________
paintman is offline   Reply With Quote
Old 25 July 2022, 02:19   #4
Member
 
Country: USA
Town: Taylor, MI
Boat name: Mr. Dinghy
Make: Caribe
Length: 4m +
Engine: Outboard, gas, 50
Join Date: Jul 2022
Posts: 4
Full throttle range is 5500 to 6000 rpm. It was barely getting to 5400 at wot no matter how it was trimmed. Near the end of my trip I noticed the fuel connection at the tank was pulling air due to a shredded O ring. I removed that fitting and directly connected the fuel line with a nipple. I'm thinking that should help performance a bit. I'm going to try to get it out again this week.
__________________
Yeti is offline   Reply With Quote
Old 25 July 2022, 10:22   #5
Member
 
Pikey Dave's Avatar
 
Country: UK - England
Town: South Yorks
Boat name: Black Pig
Make: Ribcraft
Length: 5m +
Engine: DF140a
MMSI: 235111389
Join Date: Feb 2008
Posts: 12,178
RIBase
Quote:
Originally Posted by Yeti View Post
Yesterday I took my new to me 14ft Caribe with a 50hp Honda 4 stroke out for the first time. I got it to 30mph and I'm kind of disappointed as I expected more for some reason. I'm not sure what prop is on it since there's no markings except an "R" cast into. I'm assuming it's the stock prop. I guess my question is what kind of speed should I expect from a rig like that? Thanks guys!


Have you looked on the hub of the prop? It’s strange that the dimensions aren’t on it somewhere.
__________________
Rule#2: Never argue with an idiot. He'll drag you down to his level & then beat you with experience.
Rule#3: Tha' can't educate pork.
Rule#4:Don't feed the troll
Pikey Dave is offline   Reply With Quote
Old 30 July 2022, 13:20   #6
Member
 
Country: USA
Town: Taylor, MI
Boat name: Mr. Dinghy
Make: Caribe
Length: 4m +
Engine: Outboard, gas, 50
Join Date: Jul 2022
Posts: 4
Ok. I finally was able to pull my prop off, found a name and a number, googled it, and found it is 11.25 x 14.
__________________
Yeti is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 13:39.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.