Reply
 
Thread Tools Search this Thread
 
Old 31 December 2012, 23:57   #1
Member
 
Join Date: Dec 2012
Posts: 4
Yamaha 115hp Engine Issues

Hey guys, just a quick question. Does anyone else have the same problems i do with my Yamaha 115hp engine?
Basically when im coming into my berth in the marina, im in forward, i then put the throttle into neutral, but the properly keeps turning. It does the same when going from reverse into neutral. And makes coming into my berth that bit harder.
Just wondered if you had any tips or advice on what i should do about it. And if you experience the same problems i do.
Many Thanks
Tempest-Avon
__________________
Tempest-Avon is offline   Reply With Quote
Old 01 January 2013, 00:23   #2
Member
 
Country: UK - England
Town: Brighton
Join Date: Jul 2003
Posts: 222
Hi. The prop will rotate when in neutral if the boat is moving. This is normal.
__________________
Will75 is offline   Reply With Quote
Old 01 January 2013, 00:27   #3
Member
 
Join Date: Dec 2012
Posts: 4
Okay, on my old boat, i had an Evinrude Etec 150hp it never used to do this.
So much to the extend my son has to leap off and try and stop the boat going forward to the pontoon. Just wondered if it was something to with the throttle or gears.
Thanks
__________________
Tempest-Avon is offline   Reply With Quote
Old 01 January 2013, 00:32   #4
Member
 
Country: UK - England
Town: Brighton
Join Date: Jul 2003
Posts: 222
It could be the control cable setup. They can be annoying on the Yam 115s. With the engine running but the boat tied up alongside, check that the arrows on the sliding gear change, on the port side of the engine under the cover, line up every time you return to neutral from ahead or astern.
__________________
Will75 is offline   Reply With Quote
Old 01 January 2013, 00:33   #5
Member
 
Join Date: Dec 2012
Posts: 4
Okay thank you, will check when i next go down. Hopefully it works
__________________
Tempest-Avon is offline   Reply With Quote
Old 01 January 2013, 09:38   #6
Member
 
Country: UK - England
Town: Bristol
Make: Ribcraft
Length: 5m +
Engine: Yamaha
Join Date: May 2006
Posts: 4,299
sounds like the control cable is not adjusted correctly under the hood. eg neutral is not neutral. nearly but slight more adjustment needed to centralise the gear slider.

where abouts are you?
__________________
matt h is offline   Reply With Quote
Old 01 January 2013, 10:49   #7
Member
 
Country: UK - England
Town: Gloucestershire
Boat name: Osprey
Make: Osprey Vipermax
Length: 5m +
Engine: E-tec 300 G2
MMSI: TBC
Join Date: Dec 2006
Posts: 4,021
Quote:
Originally Posted by Tempest-Avon View Post
Okay thank you, will check when i next go down. Hopefully it works
How smooth is the movement of your control box, is it stiff? As this could mean new cables are needed.

If it happens in reverse and forwards then its probably not something you can resolve with adjustment. Look for slop in the linkages and cable connections at both ends...
__________________
---------------------------------------------------
Chris Stevens

Born fiddler
Chris is offline   Reply With Quote
Old 01 January 2013, 11:28   #8
Member
 
Join Date: Dec 2012
Posts: 4
Thank you for the posts. We will try these out when we are next in Exmouth. And if these dont work, at least we will know what to ask for when it next has its service.
Many Thanks
Tempest-Avon
__________________
Tempest-Avon is offline   Reply With Quote
Reply

Tags
engines, rib, yamaha


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 02:42.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.