Zodiac bladder - connector

[Yabadabadoo]

Morning all

I’ve found a milpro bladder in new looking condition at a fair price, however no fuel line or hose adapter

Any zodiac bladder owners know what fitting goes on tank - have searched for an hour with no exact joy





Photos pinched for RN thanking you

[Pikey Dave]

Originally Posted by Yabadabadoo

Morning all

I’ve found a milpro bladder in new looking condition at a fair price, however no fuel line or hose adapter

Any zodiac bladder owners know what fitting goes on tank - have searched for an hour with no exact joy

Attachment 141070

Attachment 141071

Photos pinched for RN thanking you

Same as mine. A Suzuki female fits straight on.

[Pikey Dave]

Originally Posted by Pikey Dave

Same as mine. A Suzuki female fits straight on.

I can get you photos of my setup on Monday. If it’s in good condition, I’d grab it. We use ours all the time, we don’t bother with “normal” tanks anymore.

[Yabadabadoo]

Thank you PD yea appreciated - in the meantime, done.

Funny I’ve seen it in the vultures corner of the chandlery where the fishing boat is kept about 4 months ago, hummed and harred. Next visit it has gone. Was having a look around today and found it dropped down flat on the shelf - second chance, thanks for your help.

[Yabadabadoo]

Originally Posted by Pikey Dave

Same as mine. A Suzuki female fits straight on.

Looks like this? https://www.marinescene.co.uk/en/pro...waArC9EALw_wcB

[Pikey Dave]

Originally Posted by Yabadabadoo

Attachment 141072

Attachment 141073

Thank you PD yea appreciated - in the meantime, done.

Funny I’ve seen it in the vultures corner of the chandlery where the fishing boat is kept about 4 months ago, hummed and harred. Next visit it has gone. Was having a look around today and found it dropped down flat on the shelf - second chance, thanks for your help.

That’s the one, looks newer than mine. Good bit of kit. I got mine & stuck it on the compressor & blew it up to check for leaks. Then washed it out with a drop of diesel to get any crap out. All good.

[spartacus]

I’ve got a Tohatsu connector on mine. Remember and run PTFE tape on the thread of the fuel connector before attaching.

Quality product. Adds another 22 litres fuel capacity.

If you got it for £135 that was a steal. These things are £1k new. https://www.milpro.com/fuel-tanks-bladders/

[Pikey Dave]

Originally Posted by Pikey Dave

I can get you photos of my setup on Monday. If it’s in good condition, I’d grab it. We use ours all the time, we don’t bother with “normal” tanks anymore.

Here you go

[Yabadabadoo]

Thank you PD

Gives a lot more real estate!

Will add some photos in due course when it’s in commission

[Nos4r2]

The thread is correct to change for pretty much any threaded fuel connector.

Mine had Tohatsu (same as yours) on when I got them. That soon changed when I found out how badly they were affected by sand when I'd been on a beach.

I have the old style Mercury bayonets on them now, with a barb and a bit of hose in between because they're rebuildable easily.