some thing fishy with my fish finder,it only works propa when the boat is going slow, it used to work ok .may be its been knocked any help please ste the dj
Hi stedj,
Could be that the transducer has slipped a little too high on the transom and is not getting a smooth flow of water or cavitation (water turbulance from the prop) could be interfering with the readings. Electrical interference (from the alternator, bilge pump etc.) can also be a factor.
i had exactly the same problem solved it by moving the transducer right over on the transform almost touching the tube edge ,i was advised by seamark nunn where i purchased it to get it as far away as poss from the prop !
