Garmin VHF mount and knobs needed-any suggestions?

[Mongoose]

Hi,
Im moving my in dash Garmin VHF to fit a in dash sounder.
I don't have the mounting bracket or the knobs as it was dash mounted from new.
Anybody have any to sell, or suggestions as to where I can get them?
I can only seem to find them for sale in the States!
Thanks

[GuyC]

If you Google "Garmin VHF Bail Mount", you get a few UK hits

https://buy.garmin.com/en-GB/GB/p/556925

https://www.tcschandlery.co.uk/garmi...RoCsk0QAvD_BwE

[Mongoose]

Originally Posted by GuyC

If you Google "Garmin VHF Bail Mount", you get a few UK hits

https://buy.garmin.com/en-GB/GB/p/556925

https://www.tcschandlery.co.uk/garmi...RoCsk0QAvD_BwE

Thanks,
top link goes to the complete garmin vhf, but adding the word bail to the search has helped no end and have found a good supplier by googling-which ended up being your second link posted which I did not click on when the first one failed!
Thanks again!

[GuyC]

No worries.

Funnily the top link still works for me - £17.99 (minus knobs) from Garmin themselves but no bother.

I did decide that possibly you didn't know it was called a bail mount.

I'm glad you are sorted.

[Metz Antenna Man]

If you don't get what you want from the Chandler or break one while fitting, I have a couple of Garmin bail mounts (without the knobs though) of two different sizes (922s and Echomap) that you can have. With best regards, Phil.

[GuyC]

There's no easy way of saying this but I might have some knobs that you could have, if they are the same as the chartplotter ones.

[Metz Antenna Man]

I suppose we could say 'Rotary knurled tightening devices' to avoid sniggers.

[Pikey Dave]

It might be worth calling Garmin customer services, they are legendary & might just send you some FOC. Worth a punt.

[Mongoose]

Thanks all for your help!
Ill let you about your knobs when I remove the unit-haven't been able to get onboard and delve deeper under the dash to see if the knobs are there due to the rubbish weather!

[jeffstevens763@g]

ive got a garmin bracket with three knobs but not sure if the knobs are garmin
5 mm thread on them about 15 mm long stick through the bracket 5mm 150mm between uprights off a 5150 if i remember right FOC just pay post if of any use

[Mongoose]

Originally Posted by jeffstevens763@g

ive got a garmin bracket with three knobs but not sure if the knobs are garmin
5 mm thread on them about 15 mm long stick through the bracket 5mm 150mm between uprights off a 5150 if i remember right FOC just pay post if of any use

Tank you! Have checked finally and yes I will have them please.
Will Pm you.
Thanks again!

[jeffstevens763@g]

Originally Posted by Mongoose

Tank you! Have checked finally and yes I will have them please.
Will Pm you.
Thanks again!

PM me your address mate I'll send next week only two knobs though I've used one for a little job sorry

Cheers Jeff

[Mongoose]

Originally Posted by jeffstevens763@g

PM me your address mate I'll send next week only two knobs though I've used one for a little job sorry

Cheers Jeff

Thanks Jeff-much appreciated pal!