Hi
I have 2006 Mariner 75 Hp ,turning over the other day and the engine stopped cranking.
Seems like i have blown a fuse to the ignition switch does anyone know where these are located and what type of fuse they are.Another thing possibly i believe there is a micro switch that tells the electric or makes the circuit if the gear lever is in the correct position (Neutral) when starting wonder if that has moved out of place
I have power at the starter ( I put a link from large red supply cable at solenoid to small thin red yellow switch wire ) and starter solenoid kicked in turning engine over.So starter good
Engine made in Mexico wring diagram would be helpful too
Gears in Neutral an Kill cords is ok
Stuart
Getting there
Sorted why Key switch was not sending power to Starter Solitude ,Had to look inside the gear change remote.and found that the Micro switch was not aligned with the cam .
So the Key switch was getting a message saying it was in gear when when starting
By pushing in manually the micro switch then the key switch works fine
Just got to put in back together now ,A bit of a pain
2006 Humber Destroyer
Humma
