Mounting a transducer on a zodiac futura

[Keith 1]

Hi all.
I'm interested in putting a fish finder on this boat.
But the speed tubes may post a problem with the speed of water passing underneath and between the main and speed tubes.
Has anyone incorporated these on a futura.
Thanks

[User name]

Originally Posted by Keith 1

Hi all.
I'm interested in putting a fish finder on this boat.
But the speed tubes may post a problem with the speed of water passing underneath and between the main and speed tubes.
Has anyone incorporated these on a futura.
Thanks

You could copy the Futura transom wheel design and just make up a detachable leg that fits to the lugs that are already on the transom. That way you could make it as long/short as you like.

[Peter_C]

Your speed tubes might be in a different location, but somewhere on the starboard side there is enough room.

Hard to see but there is a little black transducer next to the red strap. Slightly tilted up for trailering.

[Keith 1]

Thank you both for your thoughts.
Peter my tubes are either side on the inside of the main tubes. So there's not much room but I get you idea an adjustable one seems the way to go and use the wheel lugs for mounting as user name suggests. I was thinking of the turbulence and speed from the water would stop the the transducer from working as it should.
BTW
Sorry for the late reply
And from this what could you recommend a decent not too expensive finder.
Many thanks again