Steering Part Needed

[matt h]

Can anyone shed light on where to get one of these for a standard Baystar Helm BACK MOUNT PLATE (220427)
Round plate used behind BayStar helm for dash mounts etc.

[mick]

http://www.hypromarine.com

[matt h]

Thank you Sir. will call them tomorrow!!

[hadd]

Originally Posted by matt h

Can anyone shed light on where to get one of these for a standard Baystar Helm BACK MOUNT PLATE (220427)

Round plate used behind BayStar helm for dash mounts etc.

I had a SS one made Matt at steel fabrication company I just went on the net & found a company local to me I already had a back plate I need a polished one made for the front of the console for the helm to sit in to because the console was splitting its made it a lot stronger now & looks great

[matt h]

Hi Andy. ive just fitted the new helm and i don't have a back
plate at all, it doesn't really need it but it would look tidier and would as you say be alot stronger.. I will call the guys tomorrow and see if one is available.

Cheers dude

[Hightower]

Have you got the dimensions of the plate you need (Inside and Outside diameter). I'm pretty sure I have some stainless rings still kicking around the garage that might be about the size you want.

Just checked 115mm Outside and 85mm Inside about 2mm thick, if it's any good just PM me your address.

[hadd]

Here,s the mounting template with dimension's for the helm if you need to get one made

[matt h]

Thanks mick for giving me the heads up. Kit arrived this morning and did a brill job. Really pleased.
Thanks Hadd as well..
Its all coming together rather well now. Got A few more goodies to fit this weekend!

[mick]

Cool !!