Suzuki Interface cable

Endeavour · 08 September 2007, 21:21

Has anyone any idea how the 120-55 interface cable connects to the Suzuki allowing it to talk to lowrancenet....
Does this cable do away with the Suzuki loom and the analogue clocks?

Erin · 09 September 2007, 10:35

It plugs into the engine diagnostic port, and then connects to Lowrance via standard NMEA2000 cable. Spose you could do away with the analog guages, but I don't think it would replace the warning lights and buzzer on the tacho, in the event of a problem.

Jon Brooks · 10 September 2007, 08:36

By all accouts it works very well.

Dorian at Ribcraft is a bit of an expert on this.
Might be worth a call to him.

v666 · 10 September 2007, 20:43

JK Max in Torquay are very helpfull and understand allot about lowrance networking.

Tim

Endeavour · 11 September 2007, 16:41

Spoke to Navico adn it turns out that Suzuki have changed the plug on 08 Engines from a round plug to a small square plug. So i now need an adapter or a new cable..... None of which a readily available......