Material source for home made tube replacement?

MAArcher · 22 May 2018, 14:49

I was wondering if anyone could recommend a US source for Hypalon materiel and adhesive to make my own custom sponsons for my canoe and maybe to make replacement tubes for an old RIB?
Thanks

John Kennett · 22 May 2018, 15:40

I’ve moved this to the North America specific forum so hopefully someone with local knowledge will see it!

office888 · 22 May 2018, 16:26

Material, Pennel & Flipo's warehouse is in Daniel Island, South Carolina. They only sell material by the spool, which is about 1.5m by 70m+ length.

Gynner · 22 May 2018, 16:59

Try NRS (nrs.com)

or https://search.defender.com/?express...s=1&Trigger=ac

atypicalguy · 22 November 2019, 03:32

Tilley Inflatables seems to sell it out of the uk. But any raft repair shop would have it also.

kiwiboyd · 22 November 2019, 15:26

The Marine Connection in Ft Pierce FL has the left over Nautica fabric, they have lots of rolls of odd color fabric, you might be lucky to find a neutral color. They will cut to length.
Most of the fabric is Orca, some Avon and Aerazur . Last time I was there, they had a roll of baffle material.
They have a good supply of EPDM end cones and some handles.

Techno Rubber in Miami is a source for EPDM handles and rub strakes.

Defender has quarts of Poly Marine Adhesive.

Good luck...please post pictures.