 |
|
08 August 2015, 22:24
|
#21
|
|
Member
Country: USA
Town: Stuart, FL
Make: Willard 730
Length: 7m +
Engine: 2 x 175 Suzuki's
Join Date: Nov 2009
Posts: 815
|
This one will get allcraft after a epoxy barrier coat. no bottom paint as it will be dry rack stored.
__________________
|
|
|
|
13 August 2015, 00:22
|
#22
|
|
Member
Country: USA
Town: Stuart, FL
Make: Willard 730
Length: 7m +
Engine: 2 x 175 Suzuki's
Join Date: Nov 2009
Posts: 815
|
Plug Progress
painted and ready to glass!
__________________
|
|
|
|
|
15 August 2015, 23:01
|
#23
|
|
Member
Country: USA
Town: Stuart, FL
Make: Willard 730
Length: 7m +
Engine: 2 x 175 Suzuki's
Join Date: Nov 2009
Posts: 815
|
Gell and skinned!
we got the gelcoat on and the skin on today, hope to infuse it Sunday or Monday! we trimed the skin back to make room for the infusion process!
__________________
|
|
|
|
|
15 August 2015, 23:04
|
#24
|
|
Member
Country: USA
Town: Stuart, FL
Make: Willard 730
Length: 7m +
Engine: 2 x 175 Suzuki's
Join Date: Nov 2009
Posts: 815
|
first coat of Primer
We got the first coat of primer on and will find all those little spots we missed, then lay on 5 coats of 2000E.
__________________
|
|
|
|
|
15 August 2015, 23:05
|
#25
|
|
Member
Country: USA
Town: Stuart, FL
Make: Willard 730
Length: 7m +
Engine: 2 x 175 Suzuki's
Join Date: Nov 2009
Posts: 815
|
so much work!
This boat was draged around the navy yard on its hull, we re-shaped the bow and fixed all the forklift marks its now near 100% and good to go!
__________________
|
|
|
|
|
15 August 2015, 23:17
|
#26
|
|
Member
Country: USA
Town: Stuart, FL
Make: Willard 730
Length: 7m +
Engine: 2 x 175 Suzuki's
Join Date: Nov 2009
Posts: 815
|
Top Idea!
We need to hold 4-6 boards on this boat and also have a radar. We wanted to keep the bridge clearance down so we designed this telescoping board rack.
__________________
|
|
|
|
|
16 August 2015, 02:03
|
#27
|
|
Member
Country: USA
Town: California
Make: Avon 5.4m Searider
Length: 5m +
Engine: Yamaha 90
Join Date: Aug 2011
Posts: 1,260
|
I like the telescopic idea. I drew out a design for my SR5.4m where part of the A-frame would do the same to accommodate shortboards (<7ft).
__________________
|
|
|
|
|
18 August 2015, 22:13
|
#28
|
|
Member
Country: USA
Town: Stuart, FL
Make: Willard 730
Length: 7m +
Engine: 2 x 175 Suzuki's
Join Date: Nov 2009
Posts: 815
|
Big day
We loaded it up and ran the pump, lets see if it works!
__________________
|
|
|
|
|
19 August 2015, 22:53
|
#29
|
|
Member
Country: USA
Town: Stuart, FL
Make: Willard 730
Length: 7m +
Engine: 2 x 175 Suzuki's
Join Date: Nov 2009
Posts: 815
|
Out of the mold
We have the part out of the mold and we will now shape and fair it the prime and paint! This is the first part i ever did with infusion so it was cool to learn how its done. Learned a lot and next time it will be much easier! We use the black spray paint to find our low spots. so after a light sanding any black left gets a little filler. I will post some pictures tomorrow so you can see the progress! It looks a little rough in the pictures but it is baby smooth.
__________________
|
|
|
|
|
19 August 2015, 23:37
|
#30
|
|
Member
Country: USA
Town: CA
Make: Zodiac RIB-P
Length: 7m +
Engine: Suzuki 250
Join Date: Aug 2010
Posts: 1,235
|
Thats cool!! It came out really nice.
that's the new rear deck right?
__________________
|
|
|
|
|
20 August 2015, 00:01
|
#31
|
|
Member
Country: USA
Town: Stuart, FL
Make: Willard 730
Length: 7m +
Engine: 2 x 175 Suzuki's
Join Date: Nov 2009
Posts: 815
|
Good stuff
Thanks! Yes, with the live well and deck hatch.
__________________
|
|
|
|
|
26 August 2015, 19:47
|
#32
|
|
Member
Country: USA
Town: Stuart, FL
Make: Willard 730
Length: 7m +
Engine: 2 x 175 Suzuki's
Join Date: Nov 2009
Posts: 815
|
update
Getting close to paint.
__________________
|
|
|
|
|
05 September 2015, 02:49
|
#33
|
|
Member
Country: USA
Town: Stuart, FL
Make: Willard 730
Length: 7m +
Engine: 2 x 175 Suzuki's
Join Date: Nov 2009
Posts: 815
|
Dash layout
Draft 1 for the new dash layout.
__________________
|
|
|
|
|
05 September 2015, 02:52
|
#34
|
|
Member
Country: USA
Town: Stuart, FL
Make: Willard 730
Length: 7m +
Engine: 2 x 175 Suzuki's
Join Date: Nov 2009
Posts: 815
|
FWD Hatch Door
we have finished the fwd hatch on this console came out really nice.
__________________
|
|
|
|
|
05 September 2015, 06:28
|
#35
|
|
Member
Country: USA
Town: CA
Make: Zodiac RIB-P
Length: 7m +
Engine: Suzuki 250
Join Date: Aug 2010
Posts: 1,235
|
I like it!
__________________
|
|
|
|
|
05 September 2015, 16:48
|
#36
|
|
Member
Country: Canada
Town: Toronto
Make: Highfield
Length: 5m +
Engine: Yamaha 115XB
Join Date: Dec 2014
Posts: 74
|
Looks great Ryan. Is the t top custom made or an available product? Looking for something similar myself that attach to side of console.
__________________
|
|
|
|
|
05 September 2015, 17:37
|
#37
|
|
Member
Country: USA
Town: Stuart, FL
Make: Willard 730
Length: 7m +
Engine: 2 x 175 Suzuki's
Join Date: Nov 2009
Posts: 815
|
Custom.
__________________
|
|
|
|
|
05 September 2015, 17:40
|
#38
|
|
Member
Country: USA
Town: Stuart, FL
Make: Willard 730
Length: 7m +
Engine: 2 x 175 Suzuki's
Join Date: Nov 2009
Posts: 815
|
starting the wiring
Putting the systems down on paper, step 1 70% on the positive side
__________________
|
|
|
|
|
06 September 2015, 02:04
|
#39
|
|
Member
Country: USA
Town: CA
Make: Zodiac RIB-P
Length: 7m +
Engine: Suzuki 250
Join Date: Aug 2010
Posts: 1,235
|
I wish I'd had that program when I did my boat. It's not that expensive. I used a free program and it took a long time....
__________________
|
|
|
|
|
06 September 2015, 03:37
|
#40
|
|
Member
Country: USA
Town: Stuart, FL
Make: Willard 730
Length: 7m +
Engine: 2 x 175 Suzuki's
Join Date: Nov 2009
Posts: 815
|
I think im 98%
so close to having this ready to go to the boards.
__________________
|
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
