Reply
 
Thread Tools Search this Thread
 
Old 18 May 2012, 23:53   #1
Member
 
Country: USA
Town: San Diego
Make: TBD
Length: 7m +
Engine: 130 Evinrude E-tech
Join Date: Sep 2010
Posts: 8
6.8 M wide-body, 2011 Harpoon RIB, 130 hp E-Tech

For sale in San Diego, CA, is our one-year-old, extra-wide, 22' RIB that has lots of seating and storage and is fully outfitted with GPS, stereo, ski tow pole, powder-coated aluminum arch, 80-gallon built-in stainless-steel fuel tank, stern swim ladder, galvanized trailer with brakes, and sun cover. This boat is ready-to-go for diving, skiing/tubing, fishing, ocean adventure, joy riding, or wherever trips.

The tubes are built of UV-resistant PVC fabric with 6 independent air chambers. Its fiberglass moderate (19 degree) V hull provides a nice compromise of being tough enough for most days on the ocean, yet flat enough for fast planning speeds in smooth water: 40 mph max and nice cruising in the low 30s. The Evinrude new-generation two-stroke E-tech engine has great "out of the hole torque", exceeds EPA standards and runs smooth, quiet, and economically. (I prefer this engine over the heavier Hondas and Yamahas...) The boat, engine, and trailer all have transferrable, 5-year factory warranties (with ~4 years left).

We special-ordered the boat from Harpoon RIBs, a Seattle-based company who has boats built to their specs in China. We rigged and commissioned the boat in San Diego last year with the locally installed Evinrude 130 HP E-Tech and all top quality gear, including: Lowrance brand 7" Color GPS/Depth/Fish finder with in-hull, flush-mount transducer and Nema 2K engine data monitoring, Fusion brand enclosed I-pod docking waterproof 200 Watt stereo system, Horizon brand VHF radio with arch-top whip antenna, 1000 Cranking amps starter battery, Gel cell deep-cycle house battery, Blue Sea Systems automatic isolation/charging relay setup, Teleflex No-Feed-Back steering, CMS Hydraulic engine jack plate (for optimizing engine height/position for rough water, shallow water, and/or maximum speed and fuel economy), Danforth-style anchor with rope/chain, auto bilge pump, full cover, safety gear, and lifting bridle. Electronics all have West Marine transferrable warranty extension plans with 1 year remaining.

Everything is in like-new shape and the engine only has ~70 hours on it. Unfortunate circumstances in a partnership are motivating us to sell.

Asking price has recently been reduced to $27,500 USD.

If shipping or trucking from San Diego is required, I can assist with making those arrangements, but actual costs will be paid by buyer. E-mail or call me with any questions or more photos - 619-224-7646. I am open to discuss any details about this great boat. I may be willing to take serious potential buyers for a sea trial in San Diego.
Attached Thumbnails
Click image for larger version

Name:	Harpoon view from upper dock.jpg
Views:	414
Size:	131.2 KB
ID:	68304   Click image for larger version

Name:	Harpoon powering up wave.jpg
Views:	851
Size:	126.1 KB
ID:	68305   Click image for larger version

Name:	Harpoon planing side shot.jpg
Views:	453
Size:	105.3 KB
ID:	68306   Click image for larger version

Name:	Harpoon on hoist, stern quarter.jpg
Views:	489
Size:	111.8 KB
ID:	68307   Click image for larger version

Name:	Harpoon console.jpg
Views:	690
Size:	91.6 KB
ID:	68308  

__________________
Ken Collins is offline   Reply With Quote
Old 24 August 2012, 15:31   #2
Member
 
Country: USA
Town: San Diego
Make: TBD
Length: 7m +
Engine: 130 Evinrude E-tech
Join Date: Sep 2010
Posts: 8
This Harpoon RIB has sold.

I'm looking for a new, bigger RIB..
__________________
Ken Collins is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 18:21.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.