Ideally I am looking for a hull and deck sections Zodiac 733. No tubes, trailer, engine, bracket, wiring, etc required. I would have to rebuild them anyhow. Or any quality commercial duty RIB in the 23'-28' range, however not an I/O Willard. Thanks
Look at my build of the 730 on the site. same hull, bracket, tank. Has not been assembled would need 30-45 days to finish if you are interested. You can come take my other 730 for a run to see how the hull handles.
Look at my build of the 730 on the site. same hull, bracket, tank. Has not been assembled would need 30-45 days to finish if you are interested. You can come take my other 730 for a run to see how the hull handles.
Thanks Ryan,
I could not get the balance I wanted from the bulkhead configuration on the Willard to make it ride as well as the Zodiac. The fuel tank needs to be further forward to keep the bow down. I would like to come up and see what you have done. The pics adn posts of the refit were great.
