Need help with hubs

Johnny5vikk · 23 May 2013, 09:45

Hi to all.already posted this in the wrong section so hopefully will get more replies here. I have an indespension vario JS06 trailer and am having real trouble sourcing a new hub. It is one inch stub axle with tapered bearings and separate grease seal on the inside, also grease nipple is on the inside but the unusual bit that stops me from getting of the shelf hubs is the depth of the hub. 100 mm from inside to outside without dust caps on. Please someone help. I have already ordered wrong ones and am drawing a blank with dealers so far. Thanks , johnny

Nos4r2 · 23 May 2013, 10:13

Have you tried taking the hubs to a dealer to ID them?

Johnny5vikk · 23 May 2013, 10:43

thanks for reply. Not yet my nearest indespension dealer is 60 miles away. I would of thought it should be fairly simple to order a hub for a trailer that is still being sold. i have several other trailer dealers in my area trying to find one plus have emailed and phoned lots off internet but either no response or they cant get it.very frustrated as i was hoping to get out on the water this weekend, conditions look good for south wales.

Johnny5vikk · 23 May 2013, 11:10

Have found company that say they can supply, have ordered and hoping its correct. thanks for help