Strange PCD Help

[CUSAC]

Hi

I have a fairly old trailer that needs all new tyres and wheels but I can't seem to find any wheels with the right PCD.

The tyres are 165R13C which is fine but the wheels (which must be 13") have 4 bolts and its 110mm (or thereabouts) bolt centre to bolt centre which doesn't seem to match anything I can find in 13 inch. Anyone got any ideas.

Pic below.

Thanks in advance for any help.

[breezeblock]

have a look at ate website for trailer parts

[mick]

Presumably you’ve measured them correctly centre to opposite centre on 4 stud or the could be old car wheels

[CUSAC]

Originally Posted by mick

Presumably you’ve measured them correctly centre to opposite centre on 4 stud or the could be old car wheels

Yes measured correctly. They appear to be Alko axles (or at least that's what the hub centre says!) so would have thought they would be a standard pattern. May just have to take a wheel into trailer suppliers and see what they make of it.

[breezeblock]

if you can't get the wheels redrill the hubs and get a more common pcd wheel

[Davie]

Old school Mazda, Toyota and Honda used 110mm pcd I think.