Reply
 
Thread Tools Search this Thread
 
Old 12 July 2014, 22:07   #1
Member
 
Country: UK - England
Town: London
Make: Bombard
Length: 3m +
Engine: Mercury HP20
Join Date: Jun 2014
Posts: 11
Aerotec valve question

My new aerotec was inflated today and I noticed that when I took the pump hose out of the valves that inflate the side tubes the air rushed out until I tapped the valve head down and then it stopped. I'm sure I didn't lose much pressure but wondered if this was normal and whether there was anything I could do to prevent this from next time I inflate the boat?
__________________
essjay2730 is offline   Reply With Quote
Old 12 July 2014, 22:24   #2
Member
 
Country: UK - England
Town: Sussex
Boat name: Bombard
Make: Aerotec 380
Length: 3m +
Engine: Mercury Mariner 15hp
Join Date: Jul 2010
Posts: 3,493
They do this sometimes, make sure the inner part is properly and fully rotated in or out and as you did a small tap will reseat it. They will leak and hiss a little, the cap with rubber O ring is the final proper seal.
__________________
Max... is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 13:17.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.